5 / 7
Page 52
Innovative Energy & Research | ISSN: 2576-1463 | Volume 7
Renewable Energy and Resources
Energy Materials and Fuel Cell Research
2
nd
International Conference on
&
August 27-28, 2018 | Boston, USA
Notes:
Microstructural design in hydrogen fuel generation and storage
H
ydrogen has been recognized as a clean and sustainable fuel. However, still many problems have to be to be solved in
the area of generation, transport, and storage of this fuel for the future hydrogen-based economy to be realized. The
reaction of water with activated aluminum powder is considered as one of the methods to generate hydrogen. The reaction
produces also aluminum hydroxide (Al(OH)
3
or AlOOH) as the byproduct; these compounds change to alumina (Al
2
O
3
) after
calcination process, and alumina can produce aluminum. Hydrogen production rate can be increased if an effective surface
area of aluminum exposed to oxidation is increased. Ball milling process is considered as a method that remarkably changes
the microstructure of morphology of aluminum hydroxides and can produce submicron or nano-sized particles. We found that
microstructural refinement can be used to promote the reaction and allow increasing the production of hydrogen. The addition
of water-soluble salts (potash or salt) also allows increasing the oxidation rate and hydrogen generation. However, we discovered
that the presence of salt had much smaller influence than microstructural modifications. The traditional shrinking core model
was modified to explain the kinetics of the reaction between aluminum particles and the fluid. The storage of hydrogen will
also require structural modification of the storage system. One a storage system that was developed by us will be discussed. We
designed a Pd-graphene composite for hydrogen storage with spherical shaped nanoparticles of 45 nm size homogeneously
distributed over a graphene substrate. This new hydrogen storage system has attractive features like high gravimetric density,
ambient conditions of hydrogen charge and low temperature of the hydrogen discharge. The palladium particles produce a
low activation energy barrier to dissociate hydrogen molecules These Pd particles, have to be nano-size and homogeneously
dispersed on the graphene surface, to serve as efficient hydrogen receptors and further facilitate a dissociation and diffusion of
hydrogen and storage in graphene via a spillover process. The hydrogen storage capacity in such a combined metal-graphene
system could be significantly increased compared to storage in graphene or in metal. In this project, we optimized the structure
of Pd/graphene to allows a hydrogen uptake at ambient conditions and discharging of hydrogen at low temperature. Detailed
analysis of the mechanism of hydrogen storage using ab-into calculation for graphene metal system is presented.
Biography
J.A. Szpunar received his PhD and DSc. degrees from Academy of Mining and Metallurgy in Cracow. He joined the Department of Mechanical Engineering at the
University of Saskatchewan in August 2009, as Tier I Canada Research Chair. He came from McGill University where he was Professor of Materials Science and
Birks Chair in Metallurgy. His research interests extend to various areas of materials related investigations. In particular he has longstanding interests in deformation
and recrystallization processes in metals; in structure and properties of thin films; in electronic interconnects; in high temperature oxidation and corrosion; in synergy
of wear, erosion and corrosion; in the applications of X-ray and neutron diffraction techniques to structure of grain boundaries and other interfaces; in hydrogen
ingress into nuclear materials; in hydrogen generation and storage: in intergranular fractures; in fatigue and failure; properties of nanocrystalline materials and
properties of nuclear materials and nuclear fuel. He was a leader of 49 major research projects – mostly materials related investigations. The results of his research
are presented in more than 950 research papers including about 600 journal publications.
jerzy.szpunar@usask.caJerzy A Szpunar
University of Saskatchewan, Canada
Jerzy A Szpunar, Innov Ener Res 2018, Volume 7
DOI: 10.4172/2576-1463-C2-004