Journal of Powder Metallurgy & Mining
Open Access

Research Article

The Creation of the Russian Production of Metal Powders as a Basic Element Additive Technology

Bogdanov SV^*

State University of Management, Moscow, Russia

*Corresponding Author:

Bogdanov SV
State University of Management, Moscow, Russia
Tel: +7-915-330-57-65
E-mail: bsv-29@yandex.ru

Received Date: November 16, 2016; Accepted Date: December 26, 2016; Published Date: January 30, 2017

Citation: Bogdanov SV (2016) The Creation of the Russian Production of Metal Powders as a Basic Element Additive Technology. J Powder Metall Min 6: 148. doi:10.4172/2168-9806.1000148

Copyright: © 2016 Bogdanov SV. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Presents the results of the development of technology and equipment for the production of granules that get on the plasma-centrifugal atomization with the guidance of the liquid bath of the melt in a rotating crucible with a skull. This technology and equipment are a promising and commercially attractive in the perspective of experimental-industrial production of pellets intended for the manufacture of monolithic products, methods of compaction and 3-D technology

Keywords