Study on Factors Affecting Iron Removal from Kerf Loss Slurry Waste Using Acid Leaching
Received Date: May 02, 2017 / Accepted Date: May 07, 2017 / Published Date: May 16, 2017
Abstract
It is significantly valuable to recover silicon and silicon carbide powder from kerf loss slurry. Iron fragments undermine both the performance of cutting efficiency and the quality of recycled powder, thus requires to be removed. The current study is to shed lights on the effect of the several physico-chemical parameters on the efficiency of iron removal during acid leaching. The significance of each parameter is studied using the method of analysis of variance. The results show that the acid leaching is an effective technique to remove iron by investigating the theory and practice. Leaching duration is a dominant parameter to determine the leaching rate, followed by the effect of temperature and acid concentration.
Keywords: Kerf loss slurry; Acid leaching; Silicon powder; Analysis of variance
Citation: Jiangshan Z, Zhengyi J, Jing G, Jingwei Z, Zhixin C (2017) Study on Factors Affecting Iron Removal from Kerf Loss Slurry Waste Using Acid Leaching. J Powder Metall Min 6: 167. Doi: 10.4172/2168-9806.1000167
Copyright: © 2017 Jiangshan Z, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Share This Article
Recommended Journals
Open Access Journals
Article Tools
Article Usage
- Total views: 4551
- [From(publication date): 1-2017 - Dec 19, 2024]
- Breakdown by view type
- HTML page views: 3811
- PDF downloads: 740
