ISSN: 2168-9806

Journal of Powder Metallurgy & Mining
Open Access

Our Group organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations
700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)
  • Short Commentary   
  • J Powder Metall Min 2017, Vol 6(3): 180
  • DOI: 10.4172/2168-9806.1000180

Properties and Application of Protective Coatings Obtained by Plasma Spraying and PVD Methods

Grzelka R1*, Hołda M1, Mazurkiewicz A2, Smolik J2, Richert M3 and Zawadzka P4
1Plasma System S.A., , 14 Towarowa Street, 41-103 Siemianowice Śląskie, Poland
2Institute for Sustainable Technologies, National Research Institute, , 6/10 Pułaskiego Street, Radom, Poland
3Department of Operations, Research and Information Technology, Faculty of Management, AGH University of Science and Technology, Mickiewicza, Cracow, Poland
4Department of Materials Science and Non-Ferrous Metals Engineering, Faculty of Non-Ferrous Metals, AGH University of Science and Technology, Mickiewicza, Krakow, Poland
*Corresponding Author : Grzelka R, Plasma System S.A., 14 Towarowa Street, 41-103 Siemianowice Śląskie, Poland, Tel: +48 603 950 464, Email: grzelka.ryszard@plasmasystem.pl

Received Date: Oct 15, 2017 / Accepted Date: Oct 21, 2017 / Published Date: Oct 27, 2017

Citation: Grzelka R, Hołda M, Mazurkiewicz A, Smolik J, Richert M, et al. (2017) Properties and Application of Protective Coatings Obtained by Plasma Spraying and PVD Methods. J Powder Metall Min 6: 180. Doi: 10.4172/2168-9806.1000180

Copyright: © 2017 Grzelka R, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Top