Designing the Porosity and Superelastic Ways of Behaving of NiTi Compounds ready by an Electro-Helped Powder Metallurgical Course in Liquid Salts
Received Date: Jul 03, 2023 / Published Date: Jul 31, 2023
Abstract
An Electro-Helped Powder Metallurgical (EPM) course can plan permeable NiTi combinations with controllable porosities and pore sizes utilizing nickel (Ni) and titanium (Ti) powders at a temperature going from 850 to 950 °C. To adjust the porosity and pore size of the NiTi alloy as well as its properties, such as the elastic modulus, phase transformation temperature, shape memory effect, and superelasticity, ammonium hydrogen carbonate was used as a sacrificial space holder. By enhancing the combination temperature and content of the conciliatory space holder, the porosity, pore size, flexible modulus, and the recuperation strain. Subsequently, the EPM course is promising to plan permeable Ti-based combinations for inserts.
Citation: Hongwei X (2023) Designing the Porosity and Superelastic Ways of Behaving of NiTi Compounds ready by an Electro-Helped Powder Metallurgical Course in Liquid Salts. J Powder Metall Min 12: 366. Doi: 10.4172/2168-9806.1000366
Copyright: © 2023 Hongwei X. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Share This Article
Recommended Journals
Open Access Journals
Article Tools
Article Usage
- Total views: 1545
- [From(publication date): 0-2023 - Dec 19, 2024]
- Breakdown by view type
- HTML page views: 1459
- PDF downloads: 86
