Resistance of Rice Genotypes to Brown Spot (Bipolaris oryzae) Disease
Received: 02-Jun-2024 / Manuscript No. acst-24-138327 / Editor assigned: 05-Jun-2024 / PreQC No. acst-24-138327 / Reviewed: 19-Jun-2024 / QC No. acst-24-138327 / Revised: 23-Jun-2024 / Manuscript No. acst-24-138327 / Published Date: 30-Jun-2024
Abstract
Rice (Oryzae sativa L.) is one of the most important cereal food security crops for an ever-increasing population globally. However, brown spot reduced its production and productivity. This study was conducted to screen rice resistant lowland rice pipelines under natural infestation. A total of 49 lines were screened for their resistance against brown spot in the field with a simple lattice design including two susceptible and two resistant varieties. Sixteen genotypes showed highly resistant reactions for Bipolaris oryzae, and six of them including susceptible checks were highly susceptible. Thus, Scrid037-4-2-2-5-2 (8693 kg/ha), Shaga (8184.50 kg/ha), scrid019-1-1-1-1-2 (7345.50 kg/ha), Fengdao 23 (7126.7 kg/ ha), and FOFIFA 167 (6895.60 kg/ha) genotypes were highly resistant, gave maximum yield and recommended in the management of Bipolaris oryzae, and finally used as sources of resistance for further breeding programs. However, inherent resistance genes of the above lines and the pathogen genetic characteristics should also be identified.
Keywords
AUDPC; Bipolaris oryzae; Disease severity; Genotypes; Resistance
Introduction
Rice (Oryza sativa L.) is an important staple food crop for the people of this planet (Martin, 2015). It is also a vital food security commodity in Ethiopia, and its growth has brought about major changes in farmers' livelihoods, creating job opportunities for a large number of people across different parts of the country (Alemu and Thompson, 2020). In Fogera plain of Amhara region, rice plays an important role in abating the problem of food insecurity of the farming community and is consumed as enjera, tela, and bread (Tadesse et al., 2018). The global rice production forecast has also been raised by 10.4 million tons, putting it 2.1 percent higher than the previous year's estimate of 502.8 million tons (FAO, 2021).
However, biotic, abiotic (salinity, water stress, temperature, soil nutrient imbalance, etc), technical, and socioeconomic factors alone, or in combination, restrict rice adoption to improved technologies and create hurdles to obtain higher potential yields (Laha et al., 2017; Fahad et al., 2019). The presence of diseases, insects, and weeds infestation and lack of resistant rice varieties have been decreased the yield of rice and its quality in Ethiopia (Nigussie and Alemu, 2011; Laha et al., 2017). In rice production, diseases caused by fungi such as rice blast, brown spot, and sheath rot are major drawbacks and result in losses in the quantity and quality of the harvested products [1].
Bipolaris oryzae (Breda de Haan) Shoemaker is the second economically important disease next to blast (IRRI, 2009; Zeleke et al., 2019). Brown spot is soil, seed, and air born (Martin, 2015; Laha et al., 2017) disease which causes both quantitative and qualitative losses (IRRI, 2013; Laha et al., 2017; Hosagoudar et al., 2019; Yosep et al., 2020). Rice brown spot causes losses of rice yield due to poor germination of seeds, infection of leaves, and reduction of leaf area for photosynthesis (Martin, 2015). It has been reported to have a widespread distribution in all rice-growing areas of the world (Aryal et al., 2016). Temperature (24-30 °C) and relative humidity (more than 90%) have a significant role for the disease development (Imran et al., 2020) [2].
In the rice protection of Ethiopia, studies to determine the status of rice diseases revealed that blast, brown spot, sheath rot, sheath blight, rice yellow mottle virus, and sheath brown spot were important in this order. The result of these studies reported that brown spot prevalence, incidence, and severity were 34%, 40.25 %, and 8.57 %, respectively (Zeleke et al., 2019). In addition, fungicides and varieties were screened for brown spot disease in the upland rice ecosystem (Yaregal and Alemu, 2016; Zeleke et al., 2019).
A yield reduction caused by brown spot has been reported from 6-90% in Asia (Yosep et al., 2020) and 50-90% was recorded in Bengal (India), and its outbreak in 1942 resulted in the death of two million people (Aryal et al., 2016; Laha et al., 2017). Depending on the nature of the disease, stage of plant growth at infection, variety tolerance, management, and weather conditions, the estimated losses can vary from 1-100% (Yaregal and Alemu, 2016). Based on the survey result done, the brown spot is the second most yield reducer next to blast amongst rice diseases today in Ethiopia (Yaregal and Alemu, 2016; Zeleke et al., 2019), and its severity was 14.4% in Fogera plain (Yalew et al., 2019) [3].
Amongst many specific methods of brown spot management, use of host plant resistance, proper crop nutrition, avoidance of water stress, planting disease-free seeds, and fungicidal spray are some preferable options (Laha et al., 2017). Plant resistance is the most effective and desirable disease control method in terms of economics and ensuring a safe environment (Hosagoudar et al., 2019). There are considerable differences in susceptibility to brown spot among rice varieties, and it needs to evaluate proven varieties and genotypes for their reaction to the disease in the various agroecological zones of rice (Hosagoudar et al., 2019).
Now days, development of brown spot management options in Ethiopian rice production are the top priorities. Since the introduction and expansion of rice are recent, during the Derg regime in 1991(Alemu et al., 2018), the research system did not bring an expected improvement in brown spot management. The primary step is the development of resistant genotypes, and this study founded a base to address brown spot problems in the rice-producing areas. Therefore, this study was aimed to screen and develop brown spot disease resistant lowland rice genotypes/pipelines under rain fed conditions [4].
Materials and Methods
Description of the study area
The field experiment was conducted at Fogera National Rice Research and Training Center (FNRRTC) experimental site, in Fogera district, Amhara region of Ethiopia (Figure 1). The center is located at about 610 km from Addis Ababa and 55 km from Bahir Dar to the north. Geographically the experimental site is positioned at a latitude of 11° 54′ 26.4′′ and longitude of 37° 41′ 08.2′′ with an altitude of 1804 meter above sea level and it receives an average annual rainfall of 1230 mm. The mean minimum and maximum temperatures of the area are 12 and 28 °C, respectively. The ecology and type of rice cultivation practiced in Fogera plain is categorized as rain-fed lowland rice culture. The soil is brown clay (vertisol) rich in underground water (Getahun, 2015) and is depleted because of monocropping.
Experimental materials and design
The experiment was conducted in an anaerobic rice ecosystem under rain-fed conditions. The treatments were arranged in a simple lattice design. The plot size was 2 meters by 1.2 meters (2.4 m2) and the block size was 17.4 m x 1.2 m (20.88 m2). The net plot size was 2 m x 0.8 m (1.6 m2) and four harvestable rows were available in each genotype. Each block was partitioned into seven plots and 49 genotypes were arranged in two replications. Whereas the total experimental area was 23.8 m x 17.4 m (414.12 m2). A spacing of 0.5 meters was used between plots and blocks, while the spacing between replications was one meter.
In the experiment, forty (40) lowland genotypes and nine lowland released varieties were evaluated; of which, two were resistant varieties (Wanzaye and Shaga) as well as the other two were susceptible varieties (Gumara and X-Jigina). X-Jigina variety was used as spreader row and sown by drilling in 20 cm interval. Randomization was held independently for each block by which treatments were assigned completely at random as described by Gomez and Gomez (1984).
Experimental procedures
The experiment was done in the 2020/2021 cropping season. The genotypes were planted at earlier identified hot spot area by assigning treatments randomly to each plot. A relatively susceptible variety, X-Jigina was sown as a disease spreader row to disseminate airborne spores by wind since the pathogen can spread from plant to plant in the field or from field to field (Martin, 2015). The seed rate for each genotype was 80 kg/ha; 13 g/plot and sown by drilling method. The recommended fertilizer rates used were 121 kg/ha for NPS and 350 kg/ha for urea. On the other hand, ten plants of each genotype were randomly selected from the middle two rows of each plot, tagged by red threads, and later used for disease data collection. Other crop management practices such as land preparation, weeding, and time of fertilizer application were done according to research recommendations.
Data collection
Disease data collection: All sampled plants symptom of Bipolaris oryzae were scored for disease severity and incidence which includes leaf, sheath, and panicle (Magar, 2015; Martin, 2015; Pantha et al., 2017). Data collection was carried out at seven days’ intervals after the appearance of the disease symptom in which tagged plants within each plot were visually evaluated for percent foliar infection (severity) (Pantha et al., 2017). Typical symptoms considered are; small, oval, or circular and dark brown leaf spots, while larger lesions usually have the same color on the edges but have a pale, usually grayish center. Most spots have a light-yellow halo around the outer edge (IRRI, 2013) [5].
Disease data were recorded five times in the growing season following the Standard Evaluation System (SES) of IRRI (2013). The 0-9 severity rating scale developed by IRRI (2013) was adopted. The disease parameters considered were disease severity, apparent infection rate (r-value), Brown spot Severity Index (BSI), and Area under Disease Progress Curve (AUDPC).
Disease incidence: It is the percentage of diseased plants or parts in the sample or population of plants. It can be the proportion or percentage of diseased leaves in a plant, diseased stalks, or tiller or diseased seedlings in a field. It was calculated using the following formula.
Disease incidence (%) = Number of infected plants per plot x 100 …………………… (1)
Total number of plants assessed
Disease severity: it is the percentage of relevant host tissues or organs covered by symptoms or lesions or damaged by the disease. Severity results from the number and size of the lesions. It was computed using the formula below (Yalew et al., 2020).
Disease severity (%) = Area of infected sample plants × 100 ………………………… (2)
The total area of plant leaves observed
Brown spot severity index (BSI): Disease severity was recorded on pre-tagged ten individual plants and the numerical values were then used to calculate the percent infection. The severity grades must be converted into Percentage Severity Index (PSI) for ease of analysis according to the formula by Wheeler (1969). The formula used was:
Brown spot Severity Index (BSI) = sum of all disease ratings x 100… (3)
Total number of rating x Maximum disease grade
Apparent infection rate (r-value)
The disease progress rate was calculated using the appropriate model for each treatment. The apparent infection rate, expressed in disease units per day, was calculated from disease severity data transformed to logistic model. It was used to assess the first and the last infection periods for each genotype with age. The transformed values were regress over time (as days after sowing) (Campbell and Madden, 1990). The rate at which rice brown spot increased (r-value) was estimated using the following formula proposed by Van der Plank (1963):
r-value = log x2- x1 * 2.303 ………………………………………………….. (4)
T1-t2
Where t1 and t2 are the initial and final days of assessment and x1 and x2 are the disease severity on the initial and final days of assessment.
Area under disease progress curve (AUDPC)
The effects of disease severity on rice genotypes along a period can be evaluated using the AUDPC. AUDPC gives a quantitative measure of disease development and intensity, and it helps to categorize genotypes under different levels of resistance (Arup et al., 2009). The disease severity on rice variety was integrated into an area under disease progress curve (AUDPC). Disease scoring was done by using a standard disease rating scale of 0 to 9 (IRRI, 2013). It needs to have repeated disease assessments to calculate the area under the disease-progress curve (AUDPC) and it enables to summarize the progress of disease severity along a time. It was calculated for each plot from BSI according to (Campbell and Madden, 1990).
n-1
AUDPC = ∑i=1 (Y i+1 +Yi) 0.5 (Ti+1 - Ti) …………………………………………....... (5)
Where Yi = brown leaf spot disease severity on the ith date
Ti = date on which the disease was scored
n = numbers of dates on which disease was scored
The mean AUDPC value was used to categorize genotypes as resistant and susceptible as described (Pantha et al., 2017).
Relative yield loss (%): The relative loss in yield of each treatment was determined as the percentage of that of protected plots of the experiment. Yield loss was calculated based on the formula below (Yosep et al., 2020):
RYL (%) = Yp – Yt x 100 ……………………………………………….. (6)
Yp
Where, RYL = relative yield loss in percent, Yp = yield from the maximum protected plots and Yt = yield from other plots.
Crop parameters
Data on all agronomic, morphological, and grain quality traits were collected based on a standard evaluation system established for rice-on-rice descriptors of IRRI (2013) and Bioversity International et al. (2007).
Phenotypic acceptability (PAcp): The score was done through visual observation to know the overall acceptability of the variety in the plot. The scale, excellent=1, good=3, fair=5, poor=7 and unacceptable=9 was used (IRRI, 2013).
Panicle length (cm): An average of five representative plants length of the main axis of the panicle was measured from the panicle base to the tip with the standard of semi-dwarf (lowland: less than 110 cm), intermediate (lowland: 110-130 cm) and tall (lowland: more than 130 cm). The stage of measurement is during the ripening stage.
1000-grain weight (g): Random sample of 1000 well-developed, whole grains, dried to 13% moisture content were weighed by precision sensitive balance for each genotype and taken in gram.
Grain yield (kg/ha): The grain harvested from four harvestable rows of each plot was weighted by sensitive balance. The final grain yield was adjusted at 14% moisture level by using the following formula (Paudel, 1995).
Adjusted grain yield = (100 − MC) × plot yield (kg) x 10000 m2 ……………………………. (7)
(100 − 14) × net plot area
Where MC= moisture content of grain in percentage
Harvest index (%): It is the percentage of the grain yield from the biological yield or biomass yield. It is calculated as follows:
Harvest index (%) = Grain yield (g/plot) x 100 ……………………………….. (8)
Biomass yield (g/plot)
Climate data: The 2020 cropping season climate data such as minimum and maximum temperature and annual rainfall were recorded on monthly basis. The weather condition had a significant effect on the occurrence and severity of rice brown spot. The rainfall distribution of the experimental site fluctuated and the onset of it was early (May). The maximum amount of rainfall was recorded during June (483.7 mm), July (471.2 mm) and August (453.8 mm), respectively . The presence of high rainfall early in sowing time harmed the productivity of rice. It was also ceased early in the middle of September and as a result of this supplementary irrigation was applied.
The maximum temperature was recorded in November (29.2 °C), October (28.06 °C), September (27.67 °C) and August (25.56 °C) cropping months of the plant growth stages and it was ideal for the occurrence, development, and spread of brown spot. The pathogen conidial growth and germination is formed between the temperature range 18-30°C and high relative humidity > 85% (Sunder et al., 2014; Aryal et al., 2016; Pantha et al., 2017).
Data analysis
Analysis of variance: Field data obtained from the experiment were subjected to analysis of variance (ANOVA) and means were separated and compared using Fischer’s least significant difference (F - LSD) test at a 5% probability level (Nneke, 2011). The data collected from the field was arranged using Microsoft excel 2016 and data on disease severity were transformed using logistic transformation before statistical analysis. Finally, it is analyzed by Statistical Analysis Software (SAS) version 9.4 at 5% least significance level. A simple correlation was made for estimated disease parameters (final percent severity index, AUDPC, and apparent infection rate) and agronomic parameters (days to maturity, number of plants per meter, number of filled grains per panicle, number of unfilled grains per panicle, thousand-grain weight, grain yield, dry biomass yield, and harvest index).
Cluster analysis
In cluster analysis, 49 genotypes were grouped into four clusters for all agronomic and epidemiological characters (Figure 2). The cluster analysis was done based on the distance of genotypes for agronomic an epidemiological parameter (Pantha et al., 2017).
Results and Discussion
Resistance level of genotypes and AUDPC value
The tested lowland rice genotypes showed a highly significant variation (P < 0.0001) in mean values of AUDPC. All genotypes were grouped into five categories of resistance. Of 49 genotypes screened, 16, 12 and 11 of them were highly resistant (mean value: <50), resistant (mean value: 51-180) and moderately resistant (mean AUDPC value: 180-259), respectively. Whereas the other four (IR 72768-8-1-1, IR 75518-18-1-2-B, scrid014-1-1-1-1 and SCRID091-20-2-2-4-4 were susceptible (mean AUDPC value: 260-340) and genotypes viz Gumara, SCRID091-20-3-1-3-4, Lunyuki, IR76999-52-1-3-2, SCRID091-18-1-5-4-4 and X-jigna were highly susceptible (mean AUDPC value: >340) for B. oryzae.
Based on mean AUDPC value, Aryal et al. (2016) had similarly grouped 20 rice genotypes into five resistant categories namely; highly resistant (mean AUDPC value: 0-200), resistant (mean AUDPC value: 201-400), moderately resistant (mean AUDPC value: 401-600), susceptible (mean AUDPC value: 601-800) and highly susceptible (mean AUDPC value: 801-1000). Dhungana et al. (2020) had also grouped 20 genotypes into five mean AUDPC value resistant categories using the range of mean values from 0-50 (highly resistant), 51-100 (resistant), 101-150 (moderately resistant), 151-200 (susceptible) and >200 (highly susceptible). Furthermore, from 244 rice germplasm screened for a brown spot by Hosagoudar et al. (2019), three were resistant, 70 were moderately resistant, 137 were moderately susceptible, 27 were susceptible and six of them were highly susceptible. As to the findings of Yosep et al. (2020), amongst 24 genotypes six genotypes were moderately resistant, four genotypes were moderately susceptible and 14 genotypes were susceptible to brown spot.
Brown spot severity index
The result showed that the tested genotypes had a variable response and a highly significant difference (p < 0.0001) concerning epidemiological parameters considered. Analyzed disease data revealed that the percent disease index of all genotypes ranged between 0 and 87.75%. The highest disease severity index (87.75%) was recorded on the susceptible variety named ‘X-Jigna’, followed by Lunyuki (36.55%), IR76999-52-1-3-2 (33.65%), SCRID091-18-1-5-4-4 (32.95%) and SCRID091-20-3-1-3-4 (30.6%).
Of 49 genotypes tested, Edirne, Suitou Chuukanbohon Nou 11, FOFIFA 167, scrid019-1-1-1-1-2, Scrid037-4-2-2-5-2, SCRID090-177-2-4-3-4, Yungeng 45, Songgeng9, IR 83372-B-B-115-4, FOFIFA 172, Wanzaye, Erib, Abay, Shaga and Hiber showed zero % severity index. Idget (16.45%), Osmancik-97 (13.5%), IR 83377-B-B-93-3 (13.4%), Tunca (12.6%), Samgangbyeo (12.55%), IR 83222-F11-66 (12%), SCRID090-60-1-1-2-4 (11.7%), Saegyejinmi (10.45%), Fogera 2 (9.4%), IR 83249- F9-29 (8.25%), P-28 (7.9%) and WAS 161-B-6-B-1 (NERICA-L-36) (6%) were resistant. Similarly, the susceptible genotypes SCRID091-20-2-2-4-4, scrid014-1-1-1-1, IR 75518-18-1-2-B, and IR 72768-8-1-1 showed the severity index score 25%, 24.8%, 24.35% and 20.25%, respectively, while severity index of Lunyuki (36.55%), SCRID091-18-1-5-4-4 (32.95%), IR76999-52-1-3-2 (33.65%), SCRID091-20-3-1-3-4 (30.6%), Gumara (20.5%) an X-jigna (87.85%) was higher than others.
The results of this experiment were in line with Mwendo et al. (2017) and Dariush et al. (2020) report. Of 100 germplasm screened by Mwendo et al. (2017), the reaction of 52 (52%) lines were grouped as resistant, 27 (27%) lines as moderately resistant, 18 lines (18%) as highly resistant, and 3 (3%) lines including the check as susceptible. Moreover, the results of Dariush et al. (2020) indicated that the response of 95 genotypes for brown spot had shown resistant, moderately resistant, and moderately susceptible reactions. Among 95 genotypes tested, 13 (13.68%) exhibited resistant (R) responses, 42 (44.21%) moderately resistant (MR), and 40 (42.10%) were found to be moderately susceptible (MS).
Apparent infection rate of bipolaris oryzae (r-value)
The disease progress was slightly varied initially (tillering stage) among tested genotypes and increased gradually (flowering stage) over time, to which the variation was highly significant (P < 0.0001). The highest apparent infection rate (r-value) was recorded on susceptible check (X-Jigna) (0.14) variety and other tested genotypes such as IR76999-52-1-3-2 (0.12), SCRID091-20-3-1-3-4 (0.11) and Lunyuki (0.11). The other susceptible check (Gumara) r- value was 0.09. Fifteen highly resistant lines had zero r-values and 11 resistant screened lines showed an apparent infection rate of 0.06 to 0.09. While the disease progress rate of 13 moderately resistant and 4 susceptible was from 0.08 to 0.1 and 0.1 to 0.11. The resistant checks apparent infection rate was also zero (Wanzaye and Shaga).
Apparent infection rates of all the tested genotypes ranged between 0 and 0.14, which is in agreement with findings (range: 0-0.1) reported by Dariush et al. (2020). Dariush et al. (2020) has been reported the range of r-value between 0 to 0.1 (moderately resistant: 0.019 to 0.02, moderately susceptible: > 0.025 to < 0.038, susceptible: 0.05 to 0.11). Similarly, results reported by Dhungana et al. (2020) further substantiated findings of the present study in Ethiopia. In general, genotypes categorized as highly resistant and moderately resistant had the lowest disease infection rate, whereas susceptible and highly susceptible lines had infected highly over time.
Relative yield loss
The findings revealed that the genotypes showed highly significant variation in grain yield loss. The variability in yield under disease-free and diseased conditions ranged from 5.85% to 85.66%. The lowest yield loss was mostly exhibited from genotypes suffering the lowest disease severity (0%), which were Scrid037-4-2-2-5-2 (0%), Shaga (5.85%), Scrid019-1-1-1-1-2 (15%), Yungeng 45 (23.66%), Suitou Chuukanbohon Nou 11 (24.99%), and SCRID090-177-2-4-3-4 (25.3%) [5].
The highest yield loss was calculated from the highly susceptible genotypes such as Lunyuki, SCRID091-20-3-1-3-4 (58.68%), X-Jigina (56.37%), and Gumara (54.6%) as well as from susceptible genotypes, IR 72768-8-1-1 (60.21%) and scrid014-1-1-1-1 (52.23%). The highest yield loss was not only recorded from genotypes that were highly susceptible and susceptible. For instance, resistant genotypes, Fogera 2 (73.57%) and IR 83222-F11-66 (65.4%) and moderately resistant genotypes like Namcheobyeo (85.66%), IR 83222-F11-167 (61.4%), and YUNLU N0.33 (59.59%) showed high relative grain yield loss. Yield loss is not only determined by brown spot severity but also by tolerance of the genotypes to brown spot . Hence, this probably resulted from the variation in yield genetic potential.
Similarly, Yosep et al. (2020) has been screened 24 genotypes against brown spot disease. They reported that the highest yield loss (> 45%) was obtained from highly severed genotypes (>30%, severity) (SBD-02, HK-07, WTN-21, HK-06, SBD-04, NGR-21, and MANU-04) which were classified as susceptible. Two moderately resistant genotypes had also high yield loss (> 20%), approaching those of moderately susceptible genotype MGR-04 (MS-9) and susceptible genotype ADN-05 (S-2). Furthermore, a susceptible genotype (B13784C-MR-2-2-8-4-1-1-3-3) showed a much lower yield loss (11.48%) which was similar to moderately resistant genotypes. Finally, Yosep et al. (2020) came to the same conclusion, stating that the magnitude of yield loss increase was not proportional to increasing disease severity, implying that genotypes have different yield loss responses to brown spot disease [6].
Grain yield and yield-related components
The analysis of variance revealed significant variation (p < 0.0001) in agronomic and grain quality parameters measured such as grain yield, thousand-grain weight, number of filled and unfilled grains, and harvest index of the tested lowland rice genotypes. The plant height was varied significantly among the rice pipelines and ranged from 72 cm (WAS 161-B-6-B-1 (NERICA-L-36)) to 149.5 cm. SCRID091-18-1-5-4-4 genotype showed the maximum plant height (149.5 cm) and panicle length (26.0 cm) [7]. There was also a highly significant variation in panicle length among genotypes evaluated; the minimum measurement recorded was for genotype “P-28” (17.80 cm). Considering days to maturity, the genotype named Edirne (122 days) was recorded as the earliest mature followed by SCRID090-177-2-4-3-4 (138 days) and Wanzaye (138 days) [8].
The highest numbers (157.40, 146.60, and 142.90) of grains per panicle were recorded on genotypes Yungeng 44, Yungeng 45, and Fengdao 23”, respectively, whereas the lowest numbers of unfilled grain per panicle were, in order, found in cultivars Idiget (3.20), Songgeng 9 (3.10) and FOFIFA 167 (2.90). However, the highest numbers of unfilled grains per panicle were obtained in Lunyuki genotypes (26.60), Gumara (24.30), and Erib (20.30). the maximum grain yield obtained was from genotypes Scrid037-4-2-2-5-2 (8693 kg/ha), Shaga (8184.50 kg/ha), scrid019-1-1-1-1-2 (7345.50 kg/ha), and Fengdao 23 (7126.70 kg/ha) [9].
On the other hand, the minimum grain yield was recorded for Namcheobyeo, Lunyuki, and WAS 161-B-6-B-1 (NERICA-L-36) with a weight of 1246.50 kg/ha, 1412.5 kg/ha, and 2296.70 kg/ha, respectively. The susceptible varieties, X-Jigna (3792.70 kg/ha) and Gumara (3946.60 kg/ha) produced minimum grain yield. Genotypes with the highest grain yield had the lowest disease severity and vice versa but not always true because moderately resistant genotypes such as YUNLU N0.33 gave minimum grain yield (3512.5 kg/ha). Pantha et al. (2017) reported that genotypes Sabitri and Radha-4 with the highest grain yield had the least disease severity, whereas genotype Sankharika had the least grain yield due to the highest final disease severity [10].
B. oryzae has a direct effect on the grain quality character (grain weight and grain number). Pantha et al. (2017) described as B. oryzae causes a decline in yield by increasing the number of empty grains, reducing the number of grains per panicle and grain weight [11]. The variation in grain weight was also highly significant (p < 0.0001). The highest grain weight was measured in Gumara, Hiber, and Ediget varieties with the weight of 39.00, and 38.10 grams per 1000 seed, respectively, whereas the lowest weight resulted from Abay (25.25 g), Edirne (20.20 g), and IR 83377-B-B-93-3 (16.35 g) genotypes. Moreover, IR 83377-B-B-93-3 and Yungeng 44 gave the maximum harvest index, while the lowest index was produced by Lunyuki (13.73%), Namcheobyeo (12.65 %), and Wanzaye (11.66 %) lines. The analysis of variance for grain yield and thousand-grain weight carried out by Magar (2015) confirmed the results of this experiment since there was a highly significant difference in grain yield and thousand-grain weight among 14 rice varieties [12].
Grain yield (maximum: 5420 kg/ha and minimum: 2340 kg/ha) and tested grain weight (highest: 18.18gm and lowest: 9.397gm) was also varied significantly (P < 0.0001) among twelve rice cultivars tested by Aryal et al. (2016). According to Dariush et al. (2020) filled grains per panicle, unfilled grain per panicle, and thousand-grain weight were ranged from 8.68 to 74.10, 7.13 to 64.45, and 16.7 to 30.6, respectively. Thousand-grain weight (ranged from 16.35 to 38.1) obtained in the present study was almost similar to what was reported by Dariush et al. (2020), whereas there was variation in the number of filled grain per panicle (78.9 to 157.4) and unfilled grain per panicle (2.9 to 26.2). Furthermore, 20 rice genotypes evaluated by Pantha et al. (2017) and Dhungana et al. (2020) were similarly varied significantly in yield and yield attributes (thousand-grain yield and grain yield) [13].
Variability of genotypes
The genotype variations were highly significant for the brown spot severity index, area under disease progress curve, and apparent infection rate characters at 1% α level [14]. Moreover, except for thousand-grain weight, genotypes were very significantly varied in days to maturity, the number of filled and unfilled grains per panicle, grain yield, and harvest index even at a 1% level of significance. Similarly, Dariush et al. (2020) has reported comparable results involving 95 tested genotypes for number of filled grains per panicle, number of unfilled grains per panicle, hundred seed weight, number of productive tillers, brown spot severity index, AUDPC, and r-value parameters. Furthermore, Mwendo et al. (2017) had also stated as there was a highly significant variation for disease severity among 100 rice germplasm. There is significant variation in sensitivity to brown spot among the 24 rice types tested by Yosep et al. (2020), which could lead to a wide range of yield losses caused by B. oryzae [15].
According to Dhungana et al. (2020), there was significant variation across 20 genotypes, with Sarju-52 (4.32 t/ha) having the highest grain yield and Sabitri (4.19 t/ha), respectively. Based on Dhungana et al. (2020) and Pantha et al. (2017) report, some genotypes, such as Kathe Jhinuwa, Radha-4, and Sabitri, were superior in grain yield and resistant to the brown spot. However, even though their production was comparable to better yielders, genotypes like BI 0530-5-10-1-2 and NR 1893 had a greater disease incidence and severity. Aryal et al. (2016) highlighted the differences in grain production, disease incidence, and severity between 12 varieties (Radha -4 and Kabeli were resistant to brown spot, while Poonam, Mithila, and Sonam were sensitive to brown spot) [16].
Cluster analysis
The maximum number of lowland rice genotypes were grouped in cluster II, followed by cluster I, whereas clusters III and IV constituted the lowest number of genotypes. Out of forty-nine genotypes tested, 42.86 %, 38.77%, 10.20% and 8.16% of genotypes were failed under clusters II, I, III, and IV, respectively. The cluster analysis of genotypes revealed that the range of days to heading and days to maturity were ranged from 100.88 to 111 and from 143.24 to 150.7 days, respectively [17]. The number of plants per meter in clusters was also ranged from 69.10 to 109.75, whereas the maximum and the minimum number of filled grains per panicle in clusters were 121.08 and 99.72. In cluster I, the number of unfilled grains was low (5.73) and the highest number was recorded from cluster IV (12.6). On the other hand, the minimum thousand-grain weight was recorded in cluster IV (29.24 g), while the maximum weight was obtained in cluster I (33.42 g). The highest grain yield was observed in cluster III (7555.45 kg/ha) followed by cluster I (5332.93 kg/ha) and II (5161.63 kg/ha). The harvest index was also high in cluster I (43.75%) and III (41.89%) and the lowest was recorded in cluster IV (25.06%) [18] (Figure 3).
Based on epidemiological parameters, cluster IV had the highest brown spot severity index (18.14%), while cluster III had the lowest severity index (4.48%). The progress of B. oryzae within time in clusters varied and the apparent infection rate in clusters was ranged from 0.02 (cluster III) to 0.08 (cluster IV). Furthermore, 49 genotypes were clustered into four clusters in their mean AUDPC value and the maximum and minimum values were showed in cluster II (231.77) and cluster III (50.75). 75% of genotypes grouped under cluster III were highly resistant. Pantha et al. (2017) had also grouped 20 genotypes into four clusters (cluster I: six susceptible genotypes, cluster II: 11 moderately resistant genotypes, cluster III: two resistant genotypes, and cluster IV: one highly susceptible genotype) based on AUDPC values [19].
Correlation of epidemiological parameters along with agronomic parameters
The correlation analysis revealed that the overall disease parameters highly significantly as well as positively and negatively associated with agronomic and grain quality characters. High plant population in a certain area reduces soil nutrients and leads to plants stress and early maturity [20]. In this regard, the number of plants per meter was negatively correlated though it was not significantly varied with days to maturity. Days to maturity was also showed a positive and significant correlation with apparent infection rate. The association of the number of plants per meter was negative and not significant with all parameters except with grain and dry biomass yield [21].
While the number of filled grains per panicle was negatively correlated with brown spot severity index, area under disease progress curve, and apparent infection rate but not significantly associated, whereas grain yield, harvest index, thousand-grain yield, and dry biomass yield positively interacted with filled grain per panicle. An increase in the number of unfilled grains per panicle affected grain yield, and harvest index negatively although it was positively associated with other agronomic characters and disease parameters. However, its association was significant with disease characters. The number of filled grain per panicle and thousand-grain weight had a similarly non-significant and negative correlation with AUDPC as reported by Dariush et al. (2020) [22].
The thousand-grain weight showed a negative correlation with the area under disease progress curve but had a non-significant association with days to maturity, number of plants per meter, dry biomass yield, number of filled grain per panicle, number of unfilled grains per panicle, thousand-grain weight, grain yield, harvest index, brown spot severity index and apparent infection rate. This analysis focused on the interaction between grain yield and epidemiological parameters. The rice grain yield was not only affected as the brown spot severity enhanced and the disease was progressed over time but also the association was highly significant with all characters. As to the report of Dhungana et al. (2020), grain yield was also negatively correlated with mean AUDPC by 14.77%. The rice dry biomass yield was not also correlated significantly with disease severity, area under disease progress curve, and apparent infection rate even if it was positive except for harvest index. Moreover, a negative and significant association showed between the rice harvest index and disease characters of B. oryzae [23].
The incidence of brown spot was negatively correlated with number of plants per meter, dry biomass yield, grain yield, and harvest index, but it was highly significant with grain yield, number of unfilled grains per panicle, and harvest index. The brown spot severity index, area under disease progress curve and apparent infection rate were positively and very significantly increased by brown spot incidence. The maturity time (days to maturity) of rice was also enhanced when the brown spot incidence increased.
The brown spot severity index was highly positively and significantly correlated with area under disease progress curve and apparent infection rate. The correlation between apparent infection rate and the disease progress curve was also positive and significantly associated. The above results of this study were not similar to Dariush et al. (2020) report since the association between the number of plants per meter and AUDPC was positive, while the number of unfilled grains per panicle and AUDPC was negative in association and vice versa. Aryal et al. (2016), Pantha et al. (2017), Dariush et al. (2020), and Dhungana et al. (2020) were also reported as there was a significant negative relationship between the disease progress curve and grain yield in conformity with the above results [24].
Regression analysis
The was significant (P ≤ 0.0014) negative linear relationship between mean AUDPC value and rice grain yield. The coefficient of determination revealed that about 10.10% variation in grain yield was due to mean AUDPC. The temperature ranged from 25.56°C to 30°C combined to brown spot severity resulted in the reduction of grain yield. Duveiller et al. (2005) also confirmed that high temperature associated with disease severity in the field reduced 1000 grain weight and grain yield [25] (Figure 4).
Conclusion and Recommendations
Conclusion
In conclusion, the development of host resistance in the management of rice brown spot (Bipolaris oryzae) is highly valuable. Thus, the development of resistant genotypes via screening against the pathogen was achieved in this experiment. Amongst 49 genotypes evaluated, about 15 genotypes were highly resistant and 11 were resistant on the assessment of brown spot severity index and mean area under disease progress curve. Based on varied resistance levels, 15 genotypes were developed as highly resistant. These genotypes were superior in grain yield and the grain yield obtained from highly susceptible and susceptible genotypes including were too low.
However, grain yield is not limited only by disease severity but also by the genetic potential of the crop. The progress of B. oryzae with time was low for highly resistant genotypes and their disease severity index and apparent infection rate were zero. Hence, the identified highly resistant genotypes are helpful for brown spot management and for designing other improved varieties through breeding programs in the future. All in all, the development of resistant rice varieties against brown spot will also be enabled to manage the pathogen in an anaerobic ecosystem of rice production and used as a source of host resistance in further breeding research works.
Recommendations
Brown spot management is truly achieved through detailed characterization of B. oryzae and design of the best control strategy. It is known that host-plant resistance is an ideal method of management since it is economical and environmentally friendly. Genotypes with highly resistant and high grain yield in combination with other good characters tested can be recommended for the management of brown spot. Therefore, Scrid037-4-2-2-5-2 (8693 kg/ha), Shaga (8184.50 kg/ha), scrid019-1-1-1-1-2 (7345.50 kg/ha), Fengdao 23 (7126.7 kg/ha) and FOFIFA 167 (6895.60 kg/ha genotypes are recommended in the management of B. oryzae and as source of parent lines for further breeding programs. The pathogen characteristics of rice diseases should also be investigated similarly because diseases management is achieved through the primary characterization of a specific pathogen. The development of resistant genotypes should also be supported with artificial inoculation and molecular tools to develop management strategies.
Acknowledgements
The authors would like to extend sincere gratitude to the Ethiopian Institute of Agricultural Research (EIAR), FNRRTC and Ambo Agricultural Research Centre (AmARC), respectively, for providing financial, logistics and laboratory support to conduct this work. We are also grateful to the staff members of the Plant Protection Department (Mr. Desalegn Yalew and Mr. Eniyew Nigatu) and the rice breeding program at FNRRTC for the material and technical support provided. Authors also acknowledge the Cogent Food and Agriculture (ORG) editorial office for the free language editing service.
Additional information
No additional information is available for this article.
Funding
The authors declare that no funds, grants, or other support was received during the preparation of this manuscript.
Disclosure statement
Authors have declared that no competing interests exist.
Author contributions
The authors contributed to the conception and design this study, analysis, and interpretation of the data. The draft and review of the manuscript was made by Muluadam Berhan Ejigu, Merkuz Abera, and Birhanu Bekele. The authors have also made substantive intellectual contributions to this manuscript and other papers. All authors have approved the final manuscript to be published and are also responsible for the accuracy, integrity, and originality of the study.
Author declaration
This study was evaluated by Bahir Dar University, which was approved by the university board examiners. The plant materials were collected based on the institutional and national ethical guidelines. This study has not been published in any other journal.
Data availability statement
The authors confirm that the data supporting the findings of this study are available within the article.
References
- Arup KM, Kanta NM, Nayak P (2009) Estimation of area under the disease progress curves in a rice-blast pathosystem from two data points. Eur J Plant Pathol.
- Aryal L, Bhattarai G, Subedi A, Subedi M, Subedi B, et al. (2016) Response of rice varieties to brown spot disease of rice at Paklihawa, Rupandehi. GJBAHS l5: 50-54.
- Campbell CL, Madden LV (1990) Introduction to Plant Disease Epidemiology. John Wiley and Sons, New York, 532 p.
- Dariusha S, Mostafa D, Ebadib AA, Padasht-Dehkaeib F, Bazgir E, et al. (2020) Screening brown spot resistance in rice genotypes at the seedling stage under water stress and irrigated conditions. Archives of Phytopathology and Plant Protection.
- Dhungana A, Puri C, Shah K, Yogi S, Dhakal DP, et al. (2020) Screening rice genotypes for brown spot disease resistance. Tunisian Journal of Plant Protection 15:29-39.
- Duveiller E, Kandel YR, Sharma RC, Shrestha SM (2005) Epidemiology of foliar blights (spot blotch and tan spot) of wheat in the plains bordering the Himalayas. Phytopathology 95: 248-256.
- Fahad S, Adnan M, Noor M, Arif M, Alam M, et al. (2019) Major Constraints for global rice production.
- Getahun D (2015) Open Field Performance of Tomato (Lycopersicon esculentum Mill.) Cultivars in the Rainy Season at Woreta, South Gondar, Ethiopia. Int J Sci Res Agri Sci 2: 117-125.
- Hosagoudar GN, Sheshaiah, Basavaraj SK, Umesh BBS (2019) Evaluation of Host Plant Resistance for Blast and Brown Spot Diseases of Paddy in Hill Zone of Karnataka, India. Int J Curr Microbiol App Sci 8: 1294-1304.
- Imran M, Sahi ST, Atiq M, Rasul A (2020) Brown leaf spot: An exacerbated embryonic disease of rice: A review. Journal of Innovative Sciences 6: 108-125.
- Laha GS, Singh R, Ladhalakshmi D, Sunder S, Srinivas MP, et al. (2017) Rice Production Worldwide Importance and Management of Rice Diseases. A Global Perspective 303-360.
- Magar PB (2015) Screening of rice varieties against brown leaf spot disease at Jyotinagar, Chitwan, Nepal. Int J Appl Sci Biotechnol 3: 56-60.
- Martin MM (2015) Inheritance of Resistance to Brown Spot Disease in Upland Rice in Uganda. A Thesis Submitted to the Directorate of Research and Graduate Training in Partial Fulfillment of the Requirements for the Award of the Degree of Master of Science in Plant Breeding and Seed Systems of Makerere University P: 18-20.
- Mwendo MM, Ochwo-Ssemakula M, Lamo J, Gibson P, Edema R, et al. (2017) Reaction of upland rice genotypes to the brown spot disease pathogen Bipolaris oryzae. African Journal of Rural Development 2: 127-133.
- Nigussie T, Alemu D (2011) An overview of national rice research and development strategy and its implementation. Oromia Bureau of Finance and Economic Development, Ethiopian Institute of Agricultural Research; Addis Ababa, Ethiopia. FRG II Project; Empowering Farmers Innovation 2: 1-2.
- Nneke NE (2011) Screening lowland rice varieties for resistance to brown spot disease in Enyong Creek rice field in Akwa Ibom state of Nigeria. GLOBAL JOURNAL OF PURE AND APPLIED SCIENCES. 18: 5-10.
- Pantha P, Shrestha SM, Manandhar HK, Gaire SP, Aryal L, Yadav DR, et al. (2017) Evaluation of rice genotypes for resistance against brown spot disease caused by Bipolaris oryzae. International Journal of Current Research 9: 48562-48569.
- Paudel MN (1995) Nutrient management for Sulphan Buri-90 rice variety in acid sulfate soil with green leaf manure. Master thesis, Asian Institute of Technology, Bangkok, Thailand 23-51pp.
- Sunder S, Ram S, Rashmi A (2014) Brown spot of rice: an overview. Indian Phytopath 67: 201-215.
- Van der Plank JE (1963) Plant Disease: Epidemics and Control. Academic Press, New York, 349 p.
- Worku AW, Abera MA (2016) Effects of Integrated Nutrient Management on Rice (Oryza sativa L) Yield and Yield Attributes, Nutrient Uptake and Some Physico-Chemical Properties of Soil: A Review. Journal of Biology, Agriculture and Healthcare 6: 20-26.
- Yalew DF, Birhan M, Zeleke T (2020) Screening of Rice Germplasms for Their Resistance against Sheath Rot Disease (Sarocladium oryzae) at Fogera, Ethiopia. J Plant Pathol Microbiol 11:518.
- Yaregal W, Alemu F (2016) Assessment of diseases on rice (Oriza sativa L.) in major growing fields of Pawe district, Northwestern Ethiopia. WSN 42: 13-23.
- Yosep SM, Ndiwa ASS, Shirly SO (2020) Brown spot disease severity, yield and yield loss relationships in pigmented upland rice cultivars from East Nusa Tenggara, Indonesia. Biodiversitas 21: 1625-1634.
- Zeleke T, Birhan M, Ambachew W (2019) Survey and identification of rice diseases in South Gondar Zone, Amhara Region, Ethiopia. Journal of Agriculture and Crops 5: 123-131.
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Indexed at, Google Scholar, Crossref
Citation: Muluadam BE (2024) Resistance of Rice Genotypes to Brown Spot(Bipolaris oryzae) Disease. Adv Crop Sci Tech 12: 704.
Copyright: © 2024 Muluadam BE. This is an open-access article distributed underthe terms of the Creative Commons Attribution License, which permits unrestricteduse, distribution, and reproduction in any medium, provided the original author andsource are credited.
Share This Article
Recommended Journals
Open Access Journals
Article Usage
- Total views: 129
- [From(publication date): 0-2024 - Nov 13, 2024]
- Breakdown by view type
- HTML page views: 101
- PDF downloads: 28