An Overview of Recent Advances in Application of Some Inorganic Materials-Biological and Technological Perspectives
Received: 11-Aug-2016 / Accepted Date: 26-Aug-2016 / Published Date: 02-Sep-2016 DOI: 10.4172/2155-952X.1000244
Abstract
Inorganic compounds which include metals, minerals, and organometallic compounds are used as catalysts, pigments, coatings, surfactants, medicines, fuels and more. They often have high melting points and specific high or low electrical conductivity properties, which make them useful for specific purposes. The scope of the review focusses on the application of a few inorganic materials with special emphasis on their biological and biomaterials perspectives.
Keywords: Inorganic materials, Organic-inorganic hybrid, Biomedical applications, Biomaterial, Drug delivery system
Introduction
Natural materials often consist of inorganic and organic hybrid distributed on the (macro) molecular or nano scale where the inorganic part provides mechanical strength and an overall structure while the organic part delivers bonding between the inorganic building blocks and/or the soft tissue [1]. The most accepted definition of biomaterials is employed by the American National Institute of Health that describes it as ‘‘any substance or combination of substances, other than drugs, synthetic or natural in origin, which can be used for any period of time, which augments or replaces partially or totally any tissue, organ or function of the body, in order to maintain or improve the quality of life of the individual”. The Williams Dictionary of Biomaterials defined biocompatibility as ‘‘ability of a material to perform with an appropriate host response in a specific situation”. The first biomaterials used by Egyptians and Roman where gold and ivory were employed for replacements of cranial defects. Based on the reaction of the tissue to the biomaterial, these are classified into three distinct categories: biotolerant, bioactive and bioinert materials [2].
Clay Materials
Clay minerals are members of the phyllosilicate or sheet silicates family (chlorite, serpentine, talc and the clay minerals) which form parallel sheets of silicates consisting of hydrated alumina–silicates. The basic building blocks of clay minerals are tetrahedral silicates and octahedral hydroxide sheets. The arrangement sheets give rise to various classes of clay minerals such as 1: 1 (e.g. kaolinite and serpentine) and 2: 1 (e.g. smectite, chlorite and vermiculite) clay.
Clay minerals are one of the oldest earth materials used for healing purposes in traditional medicine. Indigenous people around the world have been using clay minerals for curative and protective purposes. Clay minerals are usually either positively charged or negatively charged, which the main reason for their ion exchange capacity is. Layered double hydroxides (LDHs), also known as ‘‘anionic clays’’, composed of an anion located in the interlayer space that compensates for the deficit of negative charge in the brucite-like layers [3,4].
Layered silicates belonging to the clay smectite family (montmorillonites, saponites, etc.) or microfibrous clays (sepiolite and palygorskite) are currently being investigated to develop hybrid advanced materials useful for diverse purposes including environmental and biomedical applications [5-14] (Table 1).
Application | References |
---|---|
Pharmaceuticals(Antacids, Gastrointestinal protectors, Antidihhoreatics,Antidiarrhoeaics, Osmotic oral laxatives) | [15-18] |
Cosmetics(Cosmetic creams, powders and emulsions, Bathroom salts, Deodorants) | [4,15,19] |
Biomaterial | [3,20-22] |
Biosensor | [23-25] |
Medical Devices | [26] |
Table 1: Application of clay materials.
Titanium
Titanium is the 9th most abundant element in the earth’s crust; only oxygen, silicon, aluminum, iron, magnesium, calcium, sodium and potassium. The most common titanium-bearing minerals are ilmenite (FeTiO2), rutile (TiO2), anatase (TiO2), arizonite (Fe2TiO5), perovskite (CaTiO2), leucoxene (altered ilmenite) and sphene (CaTiSiO3) or titanite of these, only ilmenite, leucoxene, and rutile have significant commercial importance. About 65% of titanium is used in aerospace applications while rest 35% is divided among armour, automotive, consumer, industrial, medical and other applications [27]. The application of Titania nanotubes for energy and fuel applications is reported by many researchers [28-32]. Application of Titanium Dioxide nanoparticle as Environmental Sanitizing Agent was reported by Sujata and Jack [33].
The natural selection of titanium-based materials for implantation is due to the combination of its outstanding characteristics such as high strength, low density, high immunity to corrosion, enhanced biocompatibility, low modulus and high capacity to join with bone and other tissues. Titanium and its alloys received extensive attention in dental applications. Commercially pure Ti is the dominant material for dental implants and is used as an alternative to Ag-Pd-Au-Cu alloy not only because of its excellent properties but also due to the increasing cost of palladium. Few other reported representative dental titanium alloys are Ti–6Al–7Nb, Ti–6Al–4V, Ti–13Cu–4.5Ni, etc. [34]. For hard tissue replacement, the low Young´s modulus of titanium and its alloys is an advantage because the low elastic modulus can result in smaller stress shielding compared to other implant materials, faster bone regeneration. Artificial bones, joint replacements and dental implants, titanium and titanium alloys are often used in cardiovascular implants [35,36]. The corrosion behavior of the uncoated and hydroxyapatite (HA) coated titanium (Ti) corrosion behavior in simulated body fluid was studied by [37]. Ovissipour et al. discussed about the possible impact of titania and other nanoparticles on aquatic organisms [38]. Nia et al. reported about the method validation and application for the determination of Ti from TiO2 Nanoparticles in Biological Materials by ICP-MS [39].
Mediaswanti et al. discussed about the bioactive porous titanium and porous titanium alloys with a variety of alloy components development as the solution to overcome stress shielding problems on dense titanium and for the improvement of biomechanical properties [40]. The synthesis, bio-characterization and antibacterial property of mesoporous silica nanospheres modified by titanium dioxide was studied by Cendrowski et al. The light activated antibacterial activity of the composite was studied on E. coli. The toxicity of the nanomaterial was further studied by quantifying the amount of lactate dehydrogenase released from mouse fibroblast cells L929 with LDH assay [41]. Murr et al. discussed about the a wide range of biocompatible, antibacterial and biofunctional implant devices with stress compatibility, cement less fixation by bone cell ingrowth with special emphasis on Ti-6Al-4V [42]. Sollazzo et al. synthesized highly porous titanium biomaterial induces osteoblastic bone marrow Stem Cells differentiation [43].
Silica
In nature, silica raw material is occurring in extensive range of mineral and includes unconsolidated sand and consolidated rock. Recently extraction of high purity silica from Amazonian sponges was reported by Barros et al. [44]. Ghosh and Bhattacherjee reported the extraction of nanosilica from rice husk [45]. Silica sand is most primary ingredient material in all glass industry. The range of chemical product silica is extended to reach food processing, soap and cleaners industries, photovoltaic, catalysis, etc. [46-50]. Further applications of silica includes materials for controlled release (Fragrances and Aromas, active pharmaceutical ingredients (APIs), Biocides), Inks and Coatings, Catalysis for Fine and Specialty Chemicals, etc. filler of rubber reinforcement [51,52]. Elemental silicon also finds many applications in different forms such as nanowires as photovoltaics and as light emitting devices, in energy and electronic field, photocatalysis, etc. [48,53].
Silica nanoparticles (MSNs) have been extensive investigated as a drug delivery system as it possess excellent properties such high specific area, high pore volume, tunable pore structures and physicochemical stability. Earlier MSNs were used for controlled delivery of various hydrophilic or hydrophobic active agents. Later advances in the MSN surface properties such as surface functionalization and PEGylation rendered them as a promising drug delivery vehicle for cancer treatment [54]. Encapsulation of Water Insoluble Drugs in Mesoporous Silica Nanoparticles using Supercritical Carbon Dioxide was reported by [55]. The biomedical application of silica includes the application of Silica- Gold Core Shell Structured Nanoparticles for targeted delivery system [50]. A facile and novel approach for the synthesis of Fe3O4/SiO2 core/ shell nanocubes in which magnetite nanocubes can be functionalized with uniform silica shell for various bio-sensing applications were reported by [56]. Nivorozhkin reviewed the developments in using silica materials in drug delivery applications to bring it in the realm of commercial applications compatible with FDA to enter clinical trial [57]. Zeolite Y in the sodium form (NaY) was synthesized using amorphous silica ash derived from waste rice husks for use as an antimicrobial agent for controlling implant-related infections was developed by Salama et al. [58]. The Application of silica as 3D biosensor was reviewed by Wu [59]. López et al. reported the application of SiO2 Nanostructured Materials for Local Delivery of anticancer drug Methotrexate [60]. Functionalized Dendritic Mesoporous Silica Nanoparticles for the pH controlled release of curcumin was reported by AbouAitah et al. [61]. Hsiao et al. synthesized core-shell fluorescently labeled SiO2 NP of 15, 60 and 200 nm diameter and analyzed their cytotoxicity in THP-1 derived macrophages, A549 epithelial cells, HaCaT keratinocytes and NRK-52E kidney cells for studying the cellular uptake of Silica nanoparticles [62].
Bioglass
In 1969, Hench et al. termed certain silicate-based glass compositions as “bioactive” for their ability to bond chemically to rat bone. This oldest bioglass(BG) composition, consists of a silicate network (45 wt% SiO2 ) incorporated with 24.5 wt% Na2O, 24.5 wt% CaO and 6 wt% P2O5 as network modifier. Bioactive glass compositions developed over the years are sodium free or have additional elements such as such as fluorine, magnesium, strontium, iron, silver, boron, potassium or zinc incorporated in the network [63].
The use of Bioactive Glass S53P4 in Reconstructive Surgery in the Upper Extremity Showing Bone remodeling followed by its vascularization, cartilage repair and antibacterial properties was shown by Lindfors [64]. Tripathi et al. prepared bioactive glass containing SiO2- Na2O- CaO-P2O5-MgO was fabricated by sol-gel process. Bioactivity of the glass was explored by immersion in stimulated biological fluid (SBF) for different time periods. The formation of hydroxyl carbonate apatite (HCA) layer was identified by FTIR spectrometry, scanning electron microscope (SEM) and XRD which showed the presence of HCA as the main phase in all tested bioglass samples [65]. Rendón et al. reported the synthesis of bioactive sol-gel coatings and deposited on stainless steel AISI 316L using a pneumatic spray. The corrosion resistance of the coatings was tested with potentiodynamic curves after immersion of the coatings in SBF for 7 and 40 days. Wollastonite dispersed in the sol matrix is compatible with the physiological environment and the composition of SiO and CaO helps to accelerate the osteointegration forming an apatite layer in a short period. This fast bioactive response allows to the implant to have a good fixation to the bond [66]. Vasconcelos et al. evaluated the antimicrobial activity of a new formulation containing red and green propolis. The propolis loaded bioglass did not lose the antimicrobial activity. Results suggest that propolis in this sustained release formulation should be further tested as an alternative therapy against infectious agents of the oral cavity [67]. In vitro biocompatibility of bioglass synthesized in hydrothermal chemical route by the use of microwave energy irradiation was reported by Sarkar and Lee [68]. Haach et al. fabricated PMMA+HA and PMMA+45S5 scaffold and compared their mechanical properties and in vivo test. The histological analysis and mechanical properties suggest that both materials are suitable to bone replacement of small size areas [69]. Chitosan-based bioactive glass (BG-CH) with 17 wt% chitosan was fabricated by a freeze-drying process. BG-CH was implanted in the muscle and in the femoral condyles of ovariectomised rats. Grafted tissues were carefully removed for physico-chemical and histological analysis. Results suggests that antiosteoporotic ability makes of BG-CH a useful material for preventing bone loss associated with postmenopausal osteoporosis [70].
Mabrouk et al. prepared Nanobioactive quaternary glass system 46S6 by modified sol-gel process at 600°C with particle size ranging between 40-60 nm and a decrease in the gelation time. The in vitro biocompatibility of the sol-gel prepared glass was faster compared to the melting bioglass. Cell viability assay confirmed the effectiveness of the prepared bioactive glass as a bone replacement material. Composite scaffolds of polyvinyl alcohol (PVA) and/or quaternary bioactive glass (46S6 system) loaded ciprofloxacin were prepared by lyophilisation technique. The scaffold was characterized by Porosity SEM, XRD and FTIR. Biodegradation rate and prolonged drug release assay suggests that the scaffold offers a distinguish treatment for osteomylitis as well as local antibacterial effect [71]. Bioactive glasses, doped with traces of copper (Cu) and zinc (Zn) were synthesized by fusion method. Cu and Zn present interesting functions for the biological metabolism through their antibacterial, anti-inflammatory and antifungal properties. The material was non-cytotoxic to osteoblast cells SaOS and endothelial cells while exhibiting invivo biocompatibility as shown by the formation of hydroxyapatite. These biomaterials offer an alternative for the orthopaedic or maxillo-facial surgery [72]. Bioavailability of strontium ions from bioactive glasses in vivo was studied by Lao et al. [73]. Waselau et al. studied the in vivo effects of bioactive glass S53P4 or beta tricalcium phosphate on osteogenic differentiation of human adipose stem cells after incubation with (bone morphogenic protein 2) BMP-2 protein [74]. Glass reinforced hydroxyapatite composite and highly crystalline and still resorbable HAP by additions of alpha or beta tricalcium phosphate, Ca3(PO4)2, (TCP) was presented by Hannickel and Prado [75]. The role of TiO2+ZrO2 in the system of 45S5 bioactive glass for improving the bioactivity as well as other physical and mechanical properties of 45S5 bioactive glass was evaluated by XRD, FTIR, SEM, Density and compressive strength analysis by Himanshu et al. [76]. Structural, magnetic and in vitro bioactivity of Co-Cu ferrite and bioglass composite for hyperthermia in bone tissue engineering was studied by Sampath [77]. Implantation of nano bioglass scaffold enhanced with mesenchymal stem cell in rat calvaria was studied by Amiri [78].
Calcium Phosphate
Calcium phosphate (CaP) biomaterials are of special interest because they are bioactive and can form intimate and functional interfaces with neighbouring bone. Some commonly used CaPs include monocalcium phosphate monohydrate, monocalcium phosphate anhydrous, dicalcium phosphate dihydrate, dicalcium phosphate anhydrous, octacalcium phosphate, α- and β-tricalcium phosphate (TCP), amorphous CaP (ACP), calcium-deficient hydroxyapatite(HA) and HA [79]. CaP biomaterials are commonly used in orthopedic and dental surgery as bone void fillers or as a coating material on metallic implants [80]. The application of CaP ranges from hard tissue regeneration to the delivery of small molecules, oligonucleotides, and proteins. CaP also holds promise as a vaccine Adjuvant where nanoscale formulations have been shown to be more effective than micrometersized particles at targeting lymph node dendritic cells for enhancing immunity [81]. Calcium Phosphate Cement (CPC) is another calcium phosphate biomaterial, is a self-setting synthetic bone graft materials. CPC was approved in 1996 by the Food and Drug Administration (FDA) for repairing craniofacial defects. When mixed with an aqueous solution to form a paste, CPC can self-harden to form HA in situ. Moreover CPC has good biocompatibility and injectability, enabling minimally invasive [79].
Development of resorbable calcium phosphate cement with load bearing capacity was reported by Unosson and Engqvist [82]. Bioceramics based on α-alumina and calcium phosphate was synthesized and physical property was determined for application as dental implant [83]. Kumar et al. fabricated self-setting bone cement formulations based on egg shell derived tetracalcium phosphate bioCeramics that can immensely improve the material and biological properties of the self-setting bone cement [84]. Setting mechanisms of acidic premixed Calcium Phosphate cement was investigated by Jonas et al. [85]. Toyama et al. synthesized sulfate-ion-substituted hydroxyapatite from amorphous calcium phosphate [86]. Tensile Stress in bone cement is influenced by cement mantle thickness, acetabular size, bone quality, and body mass Index in case of total hip replacement was investigated by Lamvohee et al. [87]. Kato et al. developed ultrathin amorphous calcium phosphate freestanding sheet for dentin tubule sealing [88]. Padilla et al. developed Novel Nanostructured Zn-substituted Monetite as a biomaterial fore bone regeneration [89]. Nano-hydroxyapatite (nHA) coated with the biodegradable co-polymer poly(glycolide)- poly(ethylene glycol) (PGA-PEG) was synthesized for the delivery of Statins to treat low bone density pathologies [90]. CNT reinforced hydroxyapatite was prepared exhibited improved fracture toughness with respect to that of pure HAp for potential application in bone tissue engineering [91]. Biocompatible HA/Mwcnts/BSA was modified with TiO2 for Using as a Bone Replacement Materials [92]. Effects of surface roughness of hydroxyapatite on the attachment and proliferation of rat osteosarcoma cells was studied by Li et al. [93].
Zeolites
Zeolites are crystalline, hydrated aluminosilicates of alkali and alkaline earth cations, consisting of three dimensional frameworks of SiO4 4- and AlO54- tetrahedral linked through the shared oxygen atoms [94]. They are crystalline nanoporous inorganic materials with well-defined interconnected channels or cavities in the nanometre or subnanometer length scale, termed as micropores (0.5-2 nm) [95]. Zeolites are among the most important inorganic cation exchangers. The aluminosilicate structure is negatively charged and attracts cations that come to reside inside the pores and channels. Zeolites have large empty spaces, or cages, within their structures that can accommodate large cations, such as Na+, K+, Br+ and Ca2+ and even relatively large molecules and cationic groups, such as water, ammonia, carbonate ions, and nitrate ions [96]. Zeolite finds its application as adsorbents, ion exchangers and catalysts in industry, veterinary medicine, agriculture, sanitation and environmental protection. In human medicine zeolites have been applied as antidiarrheal remedies, the removal of ammonia ions from kidney dialysates, external treatment of wound and athlete foot, etc. [94]. Guo et al. photoactivated the Zeolite framework by encapsulating with semiconductor oxides, thereby enhancing the efficiency and selectivity as photocatalyst [95].
The properties such as long-term chemical and biological stability, ability to reversibly bind small molecules, size and shape selectivity, possibility of metalloenzyme mimicry and immunomodulatory activity reasons for the use of zeolite for biomedical applications [94]. Pavelic et al. reported the use of finely ground clinoptilolite (a natural zeolite) as a potential adjuvant in anticancer therapy [97]. In vitro application of zeolite as biomaterial on Stimulated Biological Fluid (SBF) and two types of cells (chronic myelogeneous leukemia and swiss albino fibroblast culture cells) was observed by Ceyhan et al. [98]. The application of zeolite composite membranes and crystals as potential vectors for drug-delivering biomaterials was observed by Tavolaro et al. [99]. Electrospinning method was used to fabricate polyurethane nanofibers, enhanced by zeolite crystals showed the normal development and growth of cells and exhibits antimicrobial effect against bacterial strains. This nanocomposite structure is promising for their potential usage and value in biomedical engineering applications [100]. Class “F” fly ash was used to obtain new zeolite materials for advanced wastewater treatment for removal of heavy metals(Cd2+, Cu2+ and Ni2+) from synthetic wastewaters containing one, two and three pollutants [101]. Leggo evaluated the properties and benefits of using an organozeolitic fertilizer (biofertilizer) for the production of food crops and the vegetation of contaminated land [102]. Clinoptilolite sorbent KLS-10- MA was prepared as food additive in laboratory inbred ICR line mice and reduction in lead bioaccumulation was explored. The results shows a significant favourable effect and thus it appears as a reliable means for detoxification of human and animal organisms chronically poisoned by heavy metals, particularly lead [103]. Leggo reported the use of Organozeolitic biofertilizer was used as new strategy of soil amendment to greatly enhance the scope of plant growth on damaged and marginal soils [104]. Aluminium ion adsorption capacity of zeolite from polluted tap water was investigated by Abdullah [105]. The influence of zeolites as feed additives on the chemical, biochemical and histological profile of fish. Rainbow Trout was supplemented with normal diet and diet supplemented with 1-4% of natural zeolite. Pathomorphological and histological examinations of muscle tissues and internal organs of the rainbow trout was carried out along with lipid fatty acid and amino acid composition. The results of this study confirmed that zeolites had a positive effect on the chemical, amino acid and fatty acid composition without any pathological changes in the liver, muscles and other organs [106]. Zeolite Y in the sodium form (NaY) was synthesized using amorphous silica ash derived from waste rice husks and was modified ZnO and ZnS. The antimicrobial activity was tested NaY, ZnO/NaY and ZnS/NaY. The result show a superior antimicrobial activity of ZnS/ NaY compared to the rest therefore making it a potential candidate as an antimicrobial agent for controlling implant-related infections [107]. Synthesis of porous gelatin/hyaluronic acid/zeolite composite scaffolds by lyophilisation technique was used for wound-healing applications by Grohens [108]. Aflatoxin and two adsorbents (Zeolite and Mycosorb) were added to diet to evaluate some blood biochemical and enzyme activities in broiler chickens. Results showed reduced adverse effects of AF which could be helpful in a solution of aflatoxicosis problem in poultry [109].
Magnetic Nanoparticles
Magnetic materials are those materials that show a response to an applied magnetic field. They are classified into five main types; ferromagnetic, paramagnetic, diamagnetic, antiferromagnetic and ferrimagnetic. Magnetic nanoparticles (MNPs) are those nanoparticles (NPs) that show some response to an applied magnetic field. MNPs are of great interest for a wide range of disciplines, such as magnetic fluids, catalysis, biomedicine, magnetic energy storage, information storage and spintronics, etc. [110]. Biomedical applications of magnetic nanoparticles can be classified according to their application inside or outside the body (in vivo, in vitro). For in vitro applications, the main use is in diagnostic separation, selection and magnetorelaxometry, while for in vivo applications, it could be further separated in therapeutic (hyperthermia and drug-targeting) and diagnostic applications (nuclear magnetic resonance [NMR] imaging) [111,112].
High efficacy in hyperthermia-associated with polyphosphate magnetic nanoparticles for oral cancer treatment was reported by Candido et al. [113]. Thermosensitive magnetic nanoparticles for selfcontrolled hyperthermia cancer treatment were reported by Martirosyan [114]. Israel et al. synthesized ultrasound-mediated surface engineering of theranostic magnetic nanoparticles synthesis using mixed polymers for siRNA delivery [115]. Hereba et al. studied the effect of magnetic microspheres on some biophysical parameters of human blood [116].
Zinc Oxide
Zinc Oxide (ZnO) films have become technologically important due to their range of high electrical (piezoelectric constant), optical properties (band gap), good chemical and mechanical stability, low toxicity and biodegradability [117-119]. This metal oxide finds its application in wide spectrum such as UV light emitters, spin functional devices, gas sensors, transparent electronics and surface acoustic wave devices, wireless fluorescence lamp, image recorder, rheostat, phosphor, cosmetics and sunscreens food industry, astringent for eczema, excoriation, wounds and haemorrhoids in human medicine as additives, packaging due to their antimicrobial properties [118,120]. They are also being explored for their potential use as fungicides in agriculture and as anticancer drugs and imaging in biomedical applications such as glucose, phenol H2O2, Urea, Cholesterol biosensors, etc. [121].
Recently application of ZnO nanoparticles in the perspective of opportunities and challenges in veterinary sciences was reviewed by Raguvaran et al. [120]. Guano et al. and Wallace et al. reported the synthesis of zinc oxide crystals with controlled size and morphology and ZnO nanowire respectively [121,122]. Nanocrystalline zinc oxide thin films were synthesized for application as ethanol vapour sensor by Bhasha et al. [118]. Mugwang et al. synthesized Aluminum Doped Zinc Oxide (Azo) thin films for solar cell apllications [123]. Zinc oxide nanomaterials for biomedical fluorescence detection were reviewed by Hahm [124]. Sub-acute oral toxicity of zinc oxide nanoparticles in male rats was reported by Ben-Slama et al. [118]. The author reported that oral exposure to moderate dose of ZnO-NPs has no significant main effect on the behavior of the rodents and causes subtle signs of toxicity. Kisan et al. investigated the effect of nano-Zinc Oxide on the leaf physical and nutritional quality of spinach. The reported that Nano-zinc oxide (1000 ppm) can be used as a biofortification agent to improve protein and dietary fibre contents of spinach leaves [125].
Apart from the above mentioned particle there are a number of metallic nanoparticles that offer a wide range of application. The applications of silver nanoparticles have attained the highest level of commercialization compared to other nanomaterials [126]. Silver nanoparticle is used as antimicrobial agent, magnetic and optical polarizability, catalysis, electrical conductivity, DNA sequencing, surface-enhanced Raman scattering and various other applications [127-129]. Copper and copper oxide nanoparticle finds its application in catalyst, electrical, optical, antidiabetic, antioxidant, antimicrobial activities [128,130]. Novel Selenium nanoparticles (SeNPs) are attracting increasing attention as potential drug carriers due to their excellent biological and chemopreventive activity [131-133].Gold nanoparticles, due to its biocompatibility and simple method of preparation, have wide range of application right from genomics, biosensor, immunoassay, clinical chemistry, detection and photothermolysis of microorganisms and cancer cells; targeted delivery of drugs, peptides, DNA and antigens, optical bioimaging and monitoring of cells and tissues, water purification, etc. [134,135].
Conclusion
The above review investigates the latest advances in inorganic materials for various applications with special emphasis on biological perspective. Inorganic materials have been used since antiquity and scientific research has further uplifted its potential for more delicate application by hybridizing with organic materials. The author hopes that the review gives more insight and help in the advancement of future research.
References
- Sanchez C, Julián B, Belleville P,Popall M (2005) Applications of hybrid organic–inorganic nanocomposites. Journal of Materials Chemistry 15: 3559-3592.
- Bergmann CP, Stumpf A (2013) Biomaterials: Dental ceramics. Springer Berlin Heidelberg.
- Ghadiri M, Chrzanowski W, Rohanizadeh R (2015) Biomedical applications of cationic clay minerals. RSC Advances 5: 29467-29481.
- Dawson JI, Oreffo RO (2013) Clay: New opportunities for tissue regeneration and biomaterial design. Advanced Materials 25: 4069-4086.
- Gaikwad KK (2015) Overview on in Polymer-nano clay composite paper coating for packaging application. Journal of Material Sciences & Engineering.
- Rajapakse RMG, Senarathna KGC, Kondo A, Jayawardena PS, Shimomura M (2015) Extremely low-cost alternative for the oxygen reduction catalyst of fuel cells. AdvAutomobEng 4: 121.
- Felix EO, Theresa O E, Obi G (2014) Modification of clay for multi-purpose end use and applications. 3rd International Conference and Exhibition on Materials Science & Engineering.
- Egbuchunam TO, Okieimen FE, Obi G (2015) Characterization and modification of clay materials, solid-phase reactions of organic molecules intercalated in clay minerals and their utilization in contaminant attenuation.International Conference on Smart Materials & Structures.
- Delva L, Ragaert K, Gaspar-Cunha A, Cardon L, Degrieck J (2013) Influence of montmorillonite on the mechanical properties and microstructure of extruded polypropylene. 2nd International Conference and Exhibition on Materials Science & Engineering.
- Vinokurov V, Stavitskaya A, Lvov Y (2016) Nanoconfined reactions in clay nanotubes based on metal salt loading. 5th World Congress on Materials Science & Engineering.
- Abd El Aal A (2015) Engineering assessment and applications of clays, case study on middle cretaceous (wasia formation), Riyadh, KSA. Journal of Material Sciences & Engineering.
- Boyer C, Ambrose J, Mills D (2014) Self-sterilizing surfaces using doped clay/Polymer nanocomposites. 3rd International Conference and Exhibition on Materials Science & Engineering.
- Gebremeskel SA, Bhatnagar N (2015) Effect of high impact loading on nanoclay reinforced polypropylene. Journal of Material Sciences & Engineering.
- Gomaa EAHA (2016) Preparation and characterization of organic montmorillonite- polyvinyl alcohol-co- polyacrylicnanocomposite hydrogel for heavy metal uptake in water. 2nd World Congress on Biopolymers.
- Carretero MI, Pozo M (2010) Clay and non-clay minerals in the pharmaceutical and cosmetic industries part II. Active ingredients. Applied Clay Science 47: 171-181.
- Boyer C,Mills D (2013) Polyelectrolyte coated clay nanotubes with pH controlled release. 3rd international Conference on Nanotek& Expo.
- Saikia C, Gogoi P, Maji TK (2015) Chitosan: A promising biopolymer in drug delivery applications. J Mol Genet Med S4:006.
- Xu ZP (2015) Using layered double hydroxides nanoparticle conjugated with CpG to polarise immune responses from Th2 to Th1 bias. 5th Asia-Pacific Summit on Cancer Therapy.
- Viseras C, Aguzzi C, Cerezo P, Lopez-Galindo A (2007) Uses of clay minerals in semisolid health care and therapeutic products. Applied Clay Science 36: 37-50.
- Mieszawska AJ, Llamas JG, Vaiana, CA, Kadakia MP, Naik RR, et al. (2011) Clay enriched silk biomaterials for bone formation. ActaBiomaterialia7: 3036-3041.
- Mills DK, Karnik S (2013) Clay nanotubes as growth factor delivery vehicle for bone tissue engineering. J Nano Nanotech 4: 102.
- Chauhan A (2012) Polymers and its modifications. Pharmaceut Anal Acta 3:e128.
- De Melo JV, Cosnier S, Mousty C, Martelet C, Jaffrezic-Renault N (2002). Urea biosensors based on immobilization of urease into two oppositely charged clays (Laponite and Zn-Al layered double hydroxides). Analytical chemistry 74: 4037-4043.
- Shan D, Mousty C, Cosnier S (2004) Subnanomolar cyanide detection at polyphenol oxidase/clay biosensors. Analytical chemistry 76: 178-183.
- Koffi OE, Bile BE, Bengourram J, Tankiouine S, Latrache H, et al. (2016) Electrochemical study of interaction of bacteria and clay. J MicrobBiochemTechnol 8:060-064.
- Zeng QH, Yu AB, Lu GQ, Paul DR (2005) Clay-based polymer nanocomposites: Research and commercial development. Journal of Nanoscienceand Nanotechnology 5: 1574-1592.
- Gambogi J, Gerdemann SJ (2013) Titanium metal: Extraction to application. Review of Extraction, Processing, Properties & Applications of Reactive Metals 175-210.
- Menon L (2013) Titaniananotubes for energy applications. In Advanced Materials Research Trans Tech Publications 816: 246-249.
- Pandey PC, Prakash A (2014) Effect of variable nanogeometry of titanium oxide-gold nanocomposite: Application in electrochemical sensing of hydrazine. J PhysChemBiophys 4:134.
- Kanjwal MA, Barakat NA, Sheikh FA, Kim HY (2011) Electrospuntitania oxide nanofibers coupled zinc oxide nanobranches as a novel nanostructure for lithium ion batteries Applications. 1:1-3.
- Jabbar G (2015) Trans-esterification of locally used cooking oil over zirconia/titanianano-catalyst. 3rd World Congress on Petrochemistry and Chemical Engineering.
- Bai Y, Mora-Sero I, De Angelis F, Bisquert J, Wang P (2014) Titanium dioxide nanomaterials for photovoltaic applications. Chemical reviews 114: 10095-10130.
- Sujata SA, Jack NA (2015) Titanium dioxide nanoparticles as an environmental sanitizing agent. J MicrobBiochemTechnol 7:061-064.
- Geetha M, Singh AK, Asokamani R, Gogia AK (2009) Ti based biomaterials, the ultimate choice for orthopaedic implants–a review. Progress in Materials science 54: 397-425.
- Kulkarni M, Mazare A, Schmuki P, Iglic A, Seifalian A (2014) Biomaterial surface modification of titanium and titanium alloys for medical applications. Nanomedicine 111: 111.
- Kulkarni M, Mazare A, Gongadze E, Perutkova Å , Kralj-Iglic V, et al. (2015) Titanium nanostructures for biomedical applications. Nanotechnology 26: 062002.
- Singh G, Singh H, Sidhu BS (2013) The Effect of CaPconcentration on corrosion behavior of plasma sprayed hydroxyapatite coating on titanium in simulated body fluid. J BiomimBiomater Tissue Eng 18:103.
- Ovissipour M, Rasco B, Sablani SS (2013) Impact of engineered nanoparticles on aquatic organisms. J Fisheries Livest Prod 1:e106.
- Nia Y, Millour S, Noël L, Krystek P, Jong W, et al. (2015) Determination of Ti from TiO2 nanoparticles in biological materials by different ICP-MS instruments: Method validation and applications. J NanomedNanotechnol 6:269.
- Mediaswanti K, Wen C, Ivanova EP, Berndt CC, Malherbe F, et al. (2013) A review on bioactive porous metallic biomaterials. J BiomimBiomater Tissue Eng 18:104.
- Cendrowski K, Peruzynska M, Markowska- Szczupak A, Chen X, Wajda A, et al. (2013) Mesoporoussilica nanospheres functionalized by Tio2 as a photoactive antibacterial agent. J NanomedNanotechnol 4: 182.
- Murr LE, Gaytan SM, Martinez E, Medina FR, Wicker RB (2012) Fabricating functional ti-alloy biomedical implants by additive manufacturing using electron beam melting. J Biotechnol Biomaterial 2:131.
- Sollazzo V, Palmieri A, Girardi A, Farinella F, Carinci F (2011) Trabecular titanium induces osteoblasticbone marrow stem cells differentiation. J Biotechnol Biomaterial 1:102.
- Barros IB, Volkmer-Ribeiro C, Junior VFV, Silva CC (2016) Extraction of high purity silica from Amazonian sponges. J Bioprocess Biotech 6: 276.
- Ghosh R, Bhattacherjee S (2013) Areview study on precipitated silica and activated carbon from rice husk. J ChemEng Process Technol 4: 156.
- Mansour M (2015) Develop a strategic forecast of silica sand based on supply chain decomposition. International Journal of Engineering 9:10.
- Howari FM (2015) Evaluation of chemical and petrographic characteristics of silica sand from Tabuk in Saudi Arabia. J GeolGeosci 4: 200.
- MdAsgar A, Hasan M, MdHuq F, Mahmood ZH (2014) Metal assisted synthesis of single crystalline silicon nanowires at room temperature for photovoltaic application. J NanomedNanotechnol 5: 221.
- Lai CY (2013) Mesoporoussilica nanomaterials applications in catalysis. J ThermodynCatal 5: e124.
- Amirthalingam T, Kalirajan J, Chockalingam A (2011) Use of silica-gold core shell structured nanoparticles for targeted drug delivery system. J NanomedicNanotechnol 2:119.
- Ciriminna R, Fidalgo A, Pandarus V, Béland F, Ilharco LM, et al. (2013) The sol–gel route to advanced silica-based materials and recent applications. Chemical reviews 113: 6592- 6620.
- El-Toony MM, El-Nemr KF (2012) Application of acrylonitrile butadiene rubber for management of industrial waste silica. J Material SciEngg 1:104.
- Huan C, Shu-Qing S (2014) Silicon nanoparticles: Preparation, properties and applications. Chinese Physics B 23: 088102.
- Douroumis D (2011) Mesoporous silica nanoparticles as drug delivery system. J NanomedicNanotechnol 2:102e.
- Patil A, Chirmade UN, Slipper I, Lamprou DA, Urquhart A, et al. (2011) Encapsulation of water insoluble drugs in mesoporous silica nanoparticles using supercritical carbon dioxide. J NanomedicNanotechnol 2:111.
- Abbas M, Torati SR, Lee CS, Rinaldi C, Kim CG (2014) Fe3O4/SiO2 core/ shell nanocubes: Novel coating approach with tunable silica thickness and enhancement in stability and biocompatibility. J NanomedNanotechnol 5:244.
- Alex N(2015) Silica-based matrixes for drug delivery: Ready for a prime time? 5th International Conference and Exhibition on Pharmaceutics & Novel Drug Delivery Systems.
- Salama TM, Ali IO, Gumaa HA, Lateef MA, Bakr MF (2016) Novel synthesis of nay zeolite from rice husk silica: Modification with ZnO and ZnS for antibacterial application. ChemSci J 7: 118.
- López T, Alvarez M, Arroyo S, Sánchez A, Rembao D, et al. (2011) Obtaining of SiO2nanostructured materials for local drug delivery of methotrexate. J Biotechnol Biomaterial S4:001.
- AbouAitah KEA, Farghali AA, Swiderska-Sroda A, Lojkowski W, Razin AMF, et al. (2016) pH- controlled release system for curcumin based on functionalized dendritic mesoporous silica nanoparticles. J NanomedNanotechnol 7: 351.
- Hsiao I, Gramatke AM, Joksimovic R, Sokolowski M, Gradzielski M, et al. (2014) Size and cell type dependent uptake of silica nanoparticles. J NanomedNanotechnol 5:248.
- Gerhardt LC, Boccaccini AR (2010) Bioactive glass and glass-ceramic scaffolds for bone tissue engineering. Materials 3: 3867- 3910.
- Lindfors NC (2011) Clinical experience on bioactive glass s53p4 in reconstructive surgery in the upper extremity showing bone remodelling, vascularization, cartilage repair and antibacterial properties of S53P4. J Biotechnol Biomaterial 1:111.
- Tripathi H, Kumar AS, Vyas VK, Jain S, Singh SP (2014) Synthesis and characterization of sol-gel derived SiO2-Na2O-CaO-P2O5-MgO bioactive glass as biomaterial. 3rd International Conference and Exhibition on Materials Science & Engineering.
- Rendón J, Toro A, Garcia C (2015) Bioactive sol gel coatings applied using the pneumatic spray technique on AISI 316L stainless steel. J BiotechnolBiomater 5: 174.
- Vasconcelos WA, Braga NMA, Chitarra VR, Santos VR, Andrade ÂL (2014) Bioactive glass-green and red propolis association: Antimicrobial activity against oral pathogen bacteria. Nat Prod Chem Res 2:154.
- Sarkar SK, Lee BT (2011) Synthesis of bioactive glass by microwave energy irradiation and it’sinvitro biocompatibility. Bioceramics Development and Applications.(DOI not opening)
- de Albuquerque Haach LC, de MoraesPurquerio B, Silva Jr NF, Minarelli Gaspar AM, Fortulan CA (2014) Comparison of two composites developed to be used as bone replacement – pmma/bioglass 45S5®microfiber and PMMA/hydroxyapatite. BioceramDevAppl 4:071.
- Jebahi S, Oudadesse H, Faouzi FZ, Elleuch J, Rebai T, et al. (2013) Osteoinduction and antiosteoporoticperformance of hybrid biomaterial chitosan-bioactive glass graft: Effects on bone remodeling. J Material SciEng 2: 128.
- Mabrouk M, Mostafa AA, Oudadesse H, Wers E, Lucas-Girot A, et al. (2014) Comparative study of nanobioactiveglass quaternary system 46S6. BioceramDevAppl 4: 072.
- Wers E, Bunetel L, Oudadesse H, Lefeuvre B, Lucas-Girot A, et al. (2013) Effect of copper and zinc on the bioactivity and cells viability of bioactive glasses. BioceramDevAppl S1: 013.
- Lao J, Lacroix J, Nohra J, Naaman N, Sautier JM, et al. (2013) Bioavailability of strontium ions from bioactive glasses in vivo: A micro-PIXE study of trace elements at the bone interface. BioceramDevAppl S1: 004.
- Waselau M, Patrikoski M, Mannerström B, Raki M, Bergström K, et al. (2012) In vivoeffects of bioactive glass s53p4 or beta tricalcium phosphate on osteogenic differentiation of human adipose stem cells after Incubation with BMP-2. J Stem Cell Res Ther 2:125.
- Hannickel A, Prado da Silva MH (2015) Novel bioceramic scaffolds for regenerative medicine. BioceramDevAppl 5:082.
- HimanshuT, Singh SP, Sampath KA, Prerna M, Ashish J (2016) Studies on preparation and characterization of 45S5 bioactive glass doped with (TiO2+ZrO2) as bioactive ceramic material. BioceramDevAppl 6: 090.
- Sampath KA, Himanshu T, Kevin B, Singh SP (2016) Structural, magnetic and in vitro bioactivity of Co-Cu ferrite and bioglass composite for hyperthermia in bone tissue engineering. BioceramDevAppl 6:091.
- AfsanehAmiri (2013) 2nd International Conference on Tissue Science & Regenerative Medicine.
- Wang P, Zhao L, Liu J, Weir MD, Zhou X, et al. (2014) Bone tissue engineering via nanostructured calcium phosphate biomaterials and stem cells. Bone research 2: 14017.
- Lee JS, Murphy WL (2013) Functionalizing calcium phosphate biomaterials with antibacterial silver particles. Advanced Materials 25: 1173-1179.
- Chiu D, Zhou W, Kitayaporn S, Schwartz DT, Murali-Krishna K, et al. (2012) Biomineralization and size control of stable calcium phosphate core– protein shell nanoparticles: potential for vaccine applications. BioconjugateChemistry 23: 610-617.
- Unosson J, Engqvist H (2014) Development of a resorbable calcium phosphate cement with load bearing capacity. Bioceramics Development and Applications 4: 1000074.
- Hafid M, Belafaquir M, Merzouk N, Al Gana H, Fajri L (2015) Physical properties of calcium phosphate- alumina bio ceramics as dental implants. BioceramDevAppl 5: 2.
- Jayasree R, Sampath Kumar TS, Pavani Siva Kavya K, RakeshNankarP, Mukesh D (2015) Self setting bone cement formulations based on egg shell derived tetracalcium phosphate bioceramics. BioceramDevAppl 5:084.
- Jonas A, Johanna E, Hakan E (2013) Setting mechanisms of acidic premixed calcium phosphate cement. BioceramDevAppl 3:070.
- Toyama T, Kameda S, Nishimiya N (2013) Synthesis of sulfate-ion substituted hydroxyapatite from amorphous calcium phosphate. BioceramDevAppl S1:011.
- Lamvohee JMS, Ingle P, Cheah K, Dowell J, Mootanah R (2014) Total hip replacement: Tensile stress in bone cement is influenced by cement mantle thickness, acetabular size, bone quality and body mass index. J ComputSciSystBiol 7:072-078.
- Kato N, Yamamoto E, Isai A, Nishikawa H, Kusunoki M, et al. (2013) Ultrathin amorphous calcium phosphate freestanding sheet for dentin tubule sealing. BioceramDevAppl S1:007.
- Padilla S, Garcia de Castro A, Garzón-Gutiérrez A, Benito L, Enciso S, et al. (2015) Novel nanostructured Zn- substituted monetite based biomaterial for bone regeneration. J NanomedNanotechnol 6:325.
- Moore TL, Schreurs AS, Morrison RA, Jelen EK, Loo J, et al. (2014) Polymer-coated hydroxyapatite nanoparticles for the delivery of statins. J NanomedNanotechnol 5: 237.
- Mukherjee S, Sen S, Chanda A (2013) Mechanical and in-vitro performance of CNT reinforced hydroxyapatite prepared by a shear mixing method. J NanomedNanotechol 4: 169.
- Zein SHS, Yan LX, Gholami F (2012) Modifying of the biocompatible HA/Mwcnts/BSA composites with TiO2 for using as a bone replacement materials. J Tissue SciEng 3:e111.
- Li L, Crosby K, Sawicki M, Shaw LL, Wang Y (2012) Effects of surface roughness of hydroxyapatite on cell attachment and proliferation. J BiotechnolBiomater 2:150.
- Joughehdoust S, Manafi S (2008) Application of zeolite in biomedical engineering: A review. Iran International Zeolite Conference.
- Guo Y, Zu B, Dou X (2013) Zeolite-based photocatalysts: A promising strategy for efficient photocatalysis. J ThermodynCatal 4:e120.
- Pavelic K, Hadzija M (2003) Medical applications of zeolites. Handbook of Zeolite Science and Technology. New York: Dekker 1143-1174.
- Pavelic K, Hadžija M, Bedrica L, Pavelic J, Ãikic I, et al. (2001) Natural zeolite clinoptilolite: New adjuvant in anticancer therapy. Journal of Molecular Medicine 78: 708-720.
- Ceyhan T, Tatlier M, Akçakaya H (2007) In vitro evaluation of the use of zeolites as biomaterials: Effects on simulated body fluid and two types of cells. Journal of Materials Science: Materials in Medicine 18: 1557-1562.
- Tavolaro A, Riccio II, Tavolaro P (2013) Hydrothermal synthesis of zeolite composite membranes and crystals as potential vectors for drug-delivering biomaterials. Microporous and Mesoporous Materials 167: 62-70.
- Aydogdu MO, Altun E, Gunduz O (2016) Production of the polyurethane/zeolite nanocomposites with electrospinning method for biomedical engineering applications. Annual Conference and Expo on Biomaterials.
- Visa M, Popa N (2015) Adsorption of heavy metals cations onto zeolite material from aqueous solution. J MembraSciTechnol 5:133.
- Leggo PJ (2015) Theefficacy of the organo-zeoliticbio-fertilizer. Agrotechnol 4:130.
- Beltcheva M, Metcheva R, Topashka-Ancheva M, Popov N, Teodorova S, et al. (2015) Zeolites versus lead toxicity. J BioequivAvailab 7:012-029.
- Leggo PJ (2014) Theorgano-zeolitic-soil system: A comprehensive fertilizer. Int J Waste Resources 4:156.
- Abdullah AM (2014) Aluminum pollution removal from water using a natural zeolite. J Pollut Eff Cont 2:120.
- Paritova A, Sarsembayeva N, Lozowicka B, Maulanov A, Kuzembekova G, et al. (2013) Theinfluence of chankanay zeolites as feed additives on the chemical, biochemical and histological profile of the Rainbow trout (Oncorhynchusmykiss). J Aquac Res Development 5:205.
- Salama TM, Ali IO, Gumaa HA, Lateef MA, Bakr MF (2016) Novel synthesis of nay zeolite from rice husk silica: Modification with ZnO and ZnS for antibacterial application. ChemSci J 7:118.
- GrohensY (2013) Gelatin/hyaluronic acid/zeolite composite scaffolds for wound healing. World Congress on Petrochemistry and Chemical Engineering.
- Kaki S, Moeini MM, Cheraghi J (2012) Effects of zeolite and mycosorb on serum biochemical and hematological parameters of broilers chicken aflatoxicosis. J Blood Lymph 2: 105.
- Issa B, Obaidat IM, Albiss BA, Haik Y (2013) Magnetic nanoparticles: surface effects and properties related to biomedicine applications. International Journal of Molecular Sciences 14: 21266-21305.
- Akbarzadeh A, Samiei M, Davaran S (2012) Magnetic nanoparticles: Preparation, physical properties and applications in biomedicine. NanoscaleResearch Letters 7: 1.
- Sandeep Kumar V (2013) Magnetic nanoparticles-based biomedical and bioanalytical applications. J NanomedNanotechol 4: e130.
- Candido NM, Calmon MF, Taboga SR, Bonilha JL, dos Santos MC, et al. (2014) High efficacy in hyperthermia-associated with polyphosphate magnetic nanoparticles for oral cancer treatment. J NanomedNanotechnol 5:205.
- Martirosyan KS (2012) Thermosensitive magnetic nanoparticles for self-controlled hyperthermia cancer treatment. J NanomedNanotechol 3:e112.
- Israel LL, Lellouche E, Grenèche J, Bechor M, Michaeli S, et al. (2016) Ultrasound-mediated surface engineering of theranostic magnetic nanoparticles: An effective one-pot functionalization process using mixed polymers for siRNA delivery. J NanomedNanotechnol 7: 385.
- Hereba AT, Elblbesy MA, Shawki MM (2012) Study of the effect of magnetic microspheres on some biophysical parameters of human blood (in vitro study). J BiotechnolBiomater 2:135.
- Bhasha S, Malik P, Santosh S, Purnima J (2015) Synthesis and characterization of nanocrystalline zinc oxide thin films for ethanol vapor sensor. J NanomedNanotechnol 6: 306.
- Ben-Slama I, Mrad I, Rihane N, Mir LE, Sakly M, et al. (2015) Sub-acute oral toxicity of zinc oxide nanoparticles in male rats. J NanomedNanotechnol 6:284.
- Zhang Y, Nayak TR, Hong H, Cai W (2013) Biomedical applications of zinc oxide nanomaterials. Current Molecular Medicine 13: 1633- 1645.
- Raguvaran R, Manuja A, Manuja BK (2015) Zinc oxide nanoparticles: Opportunities and challenges in veterinary sciences. Immunome Res 11:095.
- Guano SE, Debut A, Fernandez-Morales P (2016) Zinc oxide crystals with controlled size and morphology. Biol Med (Aligarh) 8: 283.
- Wallace I, Eshu OV, Chukwunonso OB,Okoro UC (2015) Synthesis and characterization of zinc oxide (ZnO) nanowire. J NanomedNanotechnol 6:321.
- Mugwang’a FK, Karimi PK, Njoroge WK, Omayio O (2015) Characterization of aluminum doped zinc oxide (Azo) thin films prepared by reactive thermal evaporation for solar cell applications. J Fundam Renewable Energy Appl 5:170.
- Hahm JI (2014) Zinc oxide nanomaterials for biomedical fluorescence detection. Journal of Nanoscienceand Nanotechnology 14: 475-486.
- Kisan B, Shruthi H, Sharanagouda H, RevanappaSB, Pramod NK (2015) Effect of nano-zinc oxide on the leaf physical and nutritional quality of spinach. Agrotechnol 5:135.
- El-Deeb NM, El-Sherbiny IM, El-Aassara MR, Hafez EE (2015) Novel trend in colon cancer therapy using silver nanoparticles synthesized by honey bee. J NanomedNanotechnol 6: 265.
- Tran QH, Le AT (2013) Silver nanoparticles: synthesis, properties, toxicology, applications and perspectives. Advances in Natural Sciences: Nanoscience and Nanotechnology 4: 033001.
- Kar S, Bagchi B, Kundu B, Bhandary S, Basu R (2014) Synthesis and characterization of Cu/Ag nanoparticle loaded mullitenanocomposite system: A potential candidate for antimicrobial and therapeutic applications. BiochimicaetBiophysicaActa 1840: 3264-3276.
- Hungund BS, Dhulappanavar GR, Ayachit NH (2015) Comparative evaluation of antibacterial activity of silver nanoparticles biosynthesized using fruit juices. J NanomedNanotechnol 6: 271.
- Ghosh S, More P, Nitnavare R, Jagtap S, Chippalkatti R, et al. (2015) Antidiabetic and antioxidant properties of copper nanoparticles synthesized by medicinal plant Dioscoreabulbifera. J NanomedNanotechnol S6: 007.
- Xia Y, You P, Xu F, Liu J, Xing F (2015) Novel functionalized selenium nanoparticles for enhanced anti-hepatocarcinoma activity in vitro. Nanoscale research letters 10: 1- 14.
- Lopez-Heras I, Sanchez-Diaz R, Anunciação DS, Madrid Y, Luque-Garcia JL, et al. (2014) Effect of chitosan-stabilized selenium nanoparticles on cell cycle arrest and invasiveness in hepatocarcinoma cells revealed by quantitative proteomics. J NanomedNanotechnol 5:226.
- Bhattacharjee A, Basu A, Ghosh P, Biswas J, Bhattacharya S (2014) Protective effect of Selenium nanoparticle against cyclophosphamide induced hepatotoxicity and genotoxicity in Swiss albino mice. Journal of Biomaterials Applications 29: 303-317.
- Dykman L, Khlebtsov N (2012) Gold nanoparticles in biomedical applications: Recent advances and perspectives. Chemical Society Reviews 41: 2256-2282.
- Sivaraj R, Priya SVR, Rajiv P, Rajendran V (2015) SargassumpolycystumC.agardh mediated synthesis of gold nanoparticles assessing its characteristics and its activity against water borne pathogens. J NanomedNanotechnol 6:280.
Citation: Kar S (2016) An Overview of Recent Advances in Application of Some Inorganic Materials-Biological and Technological Perspectives. J Biotechnol Biomater 6:244. Doi: 10.4172/2155-952X.1000244
Copyright: © 2016 Kar S. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Share This Article
Recommended Journals
Open Access Journals
Article Tools
Article Usage
- Total views: 15023
- [From(publication date): 9-2016 - Aug 17, 2024]
- Breakdown by view type
- HTML page views: 14089
- PDF downloads: 934