Journal of Powder Metallurgy & Mining
Open Access

X-Ray Fluorescence and X-Ray Diffraction Analysis on Discrete Element Modeling of Nano Powder Metallurgy Processes in Optimal Container Design

Heidari A

Editor Note: J Powder Metall Min 2017, 6:e136

DOI: 10.4172/2168-9806.1000e136

Experimental Study on Factors Affecting the Recovery of Nickel from Spent Catalyst

Khalid MM and Athraa BA

Research Article: J Powder Metall Min 2017, 6:146

DOI: 10.4172/2168-9806.1000146

Investigation of Gum Arabic and Its Suitability as a Composite Binder for Core Production

Ocheri C, Agboola JB and Moses OM

Research Article: J Powder Metall Min 2017, 6:147

DOI: 10.4172/2168-9806.1000147

The Creation of the Russian Production of Metal Powders as a Basic Element Additive Technology

Bogdanov SV

Research Article: J Powder Metall Min 2017, 6:148

DOI: 10.4172/2168-9806.1000148

Virtual Simulation of High Impact Shovel Loading Operation for Optimum Dumping Characterization

Ali D and Frimpong S

Research Article: J Powder Metall Min 2017, 6:149

DOI: 10.4172/2168-9806.1000149

Selection of Coals for Making High Quality Metallurgical Coke at Ajaokuta Steel Company Limited

Ocheri C

Research Article: J Powder Metall Min 2017, 6:150

DOI: 10.4172/2168-9806.1000150

Harnessing Local Raw Materials for Engineering and Technological Development in Nigeria

Ocheri C, Ajani OO, Daniel A and Agbo N

Research Article: J Powder Metall Min 2017, 6:151

DOI: 10.4172/2168-9806.1000151

Corrosion Protection of Transport Vehicles by Nanocoating of Decahydrobenzo[8]annulene-5,10-dihyrazone in Corrosive Environments and Weather Change

Singh RK

Research Article: J Powder Metall Min 2017, 6:152

DOI: 10.4172/2168-9806.1000152

Dry Sliding Tribological Behavior at Elevated Temperature of In Situ Aluminum Matrix Composites Fabricated by Al-ZrO2-C System with Different Mole Ratio of C/ZrO2

Zhu H, Xiaodong Sun, Jiewen Huang, Jianliang Li and Zonghan Xie

Research Article: J Powder Metall Min 2017, 6:153

DOI: 10.4172/2168-9806.1000153

Chemical Synthesis and Structural Properties of Nd, Gd and Dy Doped BiFeO₃ Lead Free Ceramics

Kumar A and Varshney D

Research Article: J Powder Metall Min 2017, 6:154

DOI: 10.4172/2168-9806.1000154

Coating Removal Techniques in Aerospace Industries: Study Case

Davarpanah A, Hemat AH and Larki M

Research Article: J Powder Metall Min 2017, 6:155

DOI: 10.4172/2168-9806.1000155

The Steel Industry: A Stimulus to National Development

Ocheri C, Ajani OO, Daniel A and Agbo N

Review Article: J Powder Metall Min 2017, 6:156

DOI: 10.4172/2168-9806.1000156

The Quantization of Space and Time

Mpantes G

Research Article: J Powder Metall Min 2017, 6:157

DOI: 10.4172/2168-9806.1000157

An IoT-Based Solution for Control and Monitoring of Additive Manufacturing Processes

Barbosa GF and Aroca RV

Research Article: J Powder Metall Min 2017, 6:158

DOI: 10.4172/2168-9806.1000158

Comparative Assessment of Locally Produced Reinforcing Steel Bars for Structural Purposes: 12 mm Steel Bars from Delta Steel Company (DSC), Warri-Nigeria as a Case Study

Ocheri C and Ibe LO

Case Report: J Powder Metall Min 2017, 6:159

DOI: 10.4172/2168-9806.1000159

From the Mining to the Obtaining of Ferroelectric Ceramics

Rodríguez MDD

Research Article: J Powder Metall Min 2017, 6:160

DOI: 10.4172/2168-9806.1000160

Identification of Hydrodynamics Coefficient of Underwater Vehicle Using Free Decay Pendulum Method

Yi DSL and Al-Qrimli HF

Research Article: J Powder Metall Min 2017, 6:161

DOI: 10.4172/2168-9806.1000161

A Case Study of Assessing Button Bits Failure through Wavelet Transform Using Rock Drilling Induced Noise Signals

Kawamura Y, Jang H, Hettiarachchi DS, Takarada Y, Okawa H and Shibuya T

Research Article: J Powder Metall Min 2017, 6:162

DOI: 10.4172/2168-9806.1000162

Structural, Magnetic and Dielectric Properties of Sm³⁺ and Mn²⁺ Co-doped BiFeO3 Nanoparticles

Ali SI, Kiani M and Rizwan S

Research Article: J Powder Metall Min 2017, 6:163

DOI: 10.4172/2168-9806.1000163

Characterization of Al Matrix SiC Reinforced Sub-Micron Composites Produced by Mechanical Alloying

Dagasan E, Gercekcioglu E and Unalan S

Research Article: J Powder Metall Min 2017, 6:164

DOI: 10.4172/2168-9806.1000164

Laser Cleaning Treatment and its Influence on the Surface Microstructure of CFRP Composite Material

Zhan X, Gao C, Lin W, Gu C, Sun W and Wei Y

Research Article: J Powder Metall Min 2017, 6:165

DOI: 10.4172/2168-9806.1000165

Tungsten and the Mining Industry

Habashi F

Research Article: J Powder Metall Min 2017, 6:166

DOI: 10.4172/2168-9806.1000166